超純水溶氧監測系統 Kit: Dual-channel Orbisphere 510 controller, 2x K1100 LDO sensors (0-2000 ppb), 2x 6 mm flow chamber, wall mount
產品編號DGK510KK-W1025
The first maintenance-free optical oxygen sensor for power plants.

Pre-configured Kit containing dual-channel Orbisphere controller 510KK0/W1C00000, 2x high accuracy Luminescent Dissolved Oxygen sensors K1100-S00, 2x 5 m sensor cable, and 2x 6 mm flow chamber. Specially designed for power plants (non-nuclear).

The Orbisphere K1100 optical sensor together with the Orbisphere controller offers a new way of monitoring oxygen in power plants. Orbisphere sensors set the industry standards for oxygen measurement by offering peace of mind to every water chemist.

Applications: Ultrapure Water 超純水應用

Range 量測範圍 : 0 - 2000 ppb dissolved O₂ (DO)
Repeatability 重複性 : ± 0.4 ppb or 1 % whichever is greater
Lower Limit of Detection (LOD) 低偵測線值 : 0.6 ppb
Response Time 反應時間 : (90%) <10 s (gas phase); <30 s (liquid phase)
Reproducibility : ± 0.8 ppb or 2 % whichever is greater

Certifications 認證 : 2004/108/EC - EN 61326-1

Calibration 校正 : Single point zero calibration with standard 99.999% nitrogen (quality 5.0) or equivalent oxygen free gas

Communication Capabilities 通訊傳輸 : 3 x 0/4-20 mA; RS485; Ethernet

- One calibration per year
- No membranes = two minutes of maintenance

關鍵字 : 超純水 溶氧 感測器, 純水 溶氧 線上 監測, 電廠 純水 監測儀, Pure water DO sensor, 超純水 溶氧 分析儀
產品介紹
One calibration per year
One zero point calibration per year is all that is needed with the K1100 sensor. Designed for minimal drift, luminescent technology makes the K1100 sensor the most stable sensor with the longest calibration interval in the industry.
 
No membranes = two minutes of maintenance
With no membranes to replace and no electrolyte solution to replenish, the K1100 requires only two minutes of maintenance per year. Corrosive or hazardous chemicals are not required, making the annual task faster, easier and safer without reducing measurement precision.
 
Low cost retrofit
The complete system consists of a controller, a flow chamber, and the K1100 Luminescent Dissolved Oxygen Sensor. The sensor is compatible with Hach Orbisphere 28 mm flow chambers, eliminating the need for engineering changes. Installation is fast and easy and does not require special preparation.
 
A new level of confidence
The K1100 optical sensor is the first to use luminescent measurement technology to measure both ppb and ppm oxygen levels in power plants. Since 1978, Hach Orbisphere sensors have set the industry standard for oxygen measurement by delivering confidence to every water chemistry manager. The K1100 maintains this tradition and offers significant operating and cost benefits.