溶氧感測器與控制主機 LDO sc Model 2 Dissolved Oxygen Sensor, 10 m Cable, Adapter, with SC4500, 2 Channels
產品編號：LXV525.97KTO033
光學法精確監測水中溶氧，以達到精確曝氣控制
Accurate process monitoring of dissolved oxygen in water for precise aeration control
Kit including the LDO Model 2 Probe, Mounting Conversion Adapter, and SC4500 Controller (100-240 VAC) with 2 Channels.
For a supremely accurate DO measurements that does not require calibration and is membrane free, turn to an innovator in DO technology, and Hach’s next generation LDO Probe. 極為準確，不需校正並且無膜的溶氧測量
Range : 0 - 20.00 ppm
Measurement Range 2 : 0 - 20.00 mg/L
Measurement Range 3 : 0 - 200 %
Accuracy : ± 0.05 ppm Below 5 ppm
Accuracy 2 : ± 0.1 ppm Above 5 ppm
Accuracy 3 : Temperature: ± 0.2 °C
Repeatability : ± 0.1 ppm (mg/L)
Resolution : 0.01 ppm (mg/L)
0.1% saturation
Response Time : T90 < 40 s
T95 < 60 s
Calibration Method : All Probes are factory calibrated and ready to use
Air Calibration: one point, 100% water saturated air
Sample Calibration: comparison to standard instrument, or comparison to Winkler Titration method
Communication : Modbus via SC controller
Controller Compatibility : SC4500, SC1000, SC200
關鍵字 : 水 DO 濃度 監測, 水中 溶氧量 分析儀, 水 DO sensor, 水中 溶氧 監測儀, dissolved oxygen analyzer, 溶氧 analyzer, water oxygen, 溶氧 分析儀
Accurate process monitoring of dissolved oxygen in water for precise aeration control
Kit including the LDO Model 2 Probe, Mounting Conversion Adapter, and SC4500 Controller (100-240 VAC) with 2 Channels.
For a supremely accurate DO measurements that does not require calibration and is membrane free, turn to an innovator in DO technology, and Hach’s next generation LDO Probe. 極為準確，不需校正並且無膜的溶氧測量
Range : 0 - 20.00 ppm
Measurement Range 2 : 0 - 20.00 mg/L
Measurement Range 3 : 0 - 200 %
Accuracy : ± 0.05 ppm Below 5 ppm
Accuracy 2 : ± 0.1 ppm Above 5 ppm
Accuracy 3 : Temperature: ± 0.2 °C
Repeatability : ± 0.1 ppm (mg/L)
Resolution : 0.01 ppm (mg/L)
0.1% saturation
Response Time : T90 < 40 s
T95 < 60 s
Calibration Method : All Probes are factory calibrated and ready to use
Air Calibration: one point, 100% water saturated air
Sample Calibration: comparison to standard instrument, or comparison to Winkler Titration method
Communication : Modbus via SC controller
Controller Compatibility : SC4500, SC1000, SC200
關鍵字 : 水 DO 濃度 監測, 水中 溶氧量 分析儀, 水 DO sensor, 水中 溶氧 監測儀, dissolved oxygen analyzer, 溶氧 analyzer, water oxygen, 溶氧 分析儀
No Calibration Required
The Hach LDO probe uses luminescent dissolved oxygen technology. Traditional DO probes require DO sensor calibration, which increase maintenance requirements.
The Hach LDO probe uses luminescent dissolved oxygen technology. Traditional DO probes require DO sensor calibration, which increase maintenance requirements.
No Membranes to Replace
There is virtually no maintenance with Hach's breakthrough luminescent technology: there are no membranes to replace, no electrolyte solution to replenish, and no anode or cathode to clean.
No Missed Cleaning Cycles
The Hach LDO probe is equipped with Prognosys, a predictive diagnostic system, that allows you to be proactive in your maintenance by alerting you to upcoming instrument issues. Know with confidence whether changes in your dissolved oxygen level measurements are due to changes in your instrument or your water. To make sure routine cleaning cycles are never missed, the probe offers operators customizable diagnostic alert indicators, ensuring the probe can operate at its maximum performance level.
Customizable service indicators trigger a service message so that a cleaning cycle is never missed.
The Hach LDO probe is equipped with Prognosys, a predictive diagnostic system, that allows you to be proactive in your maintenance by alerting you to upcoming instrument issues. Know with confidence whether changes in your dissolved oxygen level measurements are due to changes in your instrument or your water. To make sure routine cleaning cycles are never missed, the probe offers operators customizable diagnostic alert indicators, ensuring the probe can operate at its maximum performance level.
Customizable service indicators trigger a service message so that a cleaning cycle is never missed.
No Drift
Cutting-edge 3D calibration procedure is conducted prior to shipping, the DO probe will not drift and is more accurate than ever before.
Cutting-edge 3D calibration procedure is conducted prior to shipping, the DO probe will not drift and is more accurate than ever before.
No Complications
Our newest DO probe has a robust design with a smaller footprint allows for easier handling with enhanced durability.
Our newest DO probe has a robust design with a smaller footprint allows for easier handling with enhanced durability.
