水中油線上感測器 FP360sc Oil-in-Water Sensor
產品編號：
UV螢光法，高精密度，高靈敏度，高效率，運作穩定，線上連續偵測水中油
Continuous oil-in-water monitoring for the right price.
即使是最細微的油跡也會損害水質。 高精密型 FP 360 sc 水中油線上感測器專為監測水中的礦物油而設計。 連續監測民生和工業廢汙水、地面水、製程水、工業用水、海水淡化進水監測等。 浸入式探頭設計。 可選購自動清潔裝置。 每兩年校正一次。 有不銹鋼或鈦材質可供選擇。
Even the smallest oil traces can impair water quality. The FP 360 sc is specifically designed to detect traces of mineral oils in water while providing the necessary value and benefits for a positive return on investment. The sensor monitors surface water, process water and industrial water continuously. It has a submersible probe design. The sensor comes with an optional cleaning unit. Calibrate once every two years. Available in stainless steel or titanium.
Measurement Method 量測方法 : UV fluorescence method for polycyclic aromatic hydrocarbons (PAH) 多環芳烴（PAH）的紫外線光學法
Range 量測範圍 :
0 - 500 ppb (µg/L) (PAH) or 0.1 - 15 ppm (mg/L) (Oil)
0 - 5000 ppb (µg/L) (PAH) or 0.1 - 150 ppm (mg/L) (Oil)
Detector 偵測器 : UV photodiode with interference filter; Compensation of daylight and flashlamp intensity fluctuations
Pressure range 壓力範圍 : Max. 30 bar (measurement probe)
Reproducibility : 2.5 % of measured value at constant temperature
Response time 反應時間 : 10 s
Excitation : Wavelength 254 nm
Calibration 校正 : Factory calibrated with UV fluorescence standard or process calibration with results of a grab sample analysis.
Controller compatibility 相容控制主機 : SC4500, SC1000, SC200 使用Hach SC系列 digital controllers 數位水質控制主機進行監控
關鍵字 : 連續監測 水中 油 分析儀, 精密型 水中油 線上監測儀, oil in water analyzer, monitor oil in water, water oil detector, 水中油 偵測, 水 油脂 偵測器
Continuous oil-in-water monitoring for the right price.
即使是最細微的油跡也會損害水質。 高精密型 FP 360 sc 水中油線上感測器專為監測水中的礦物油而設計。 連續監測民生和工業廢汙水、地面水、製程水、工業用水、海水淡化進水監測等。 浸入式探頭設計。 可選購自動清潔裝置。 每兩年校正一次。 有不銹鋼或鈦材質可供選擇。
Even the smallest oil traces can impair water quality. The FP 360 sc is specifically designed to detect traces of mineral oils in water while providing the necessary value and benefits for a positive return on investment. The sensor monitors surface water, process water and industrial water continuously. It has a submersible probe design. The sensor comes with an optional cleaning unit. Calibrate once every two years. Available in stainless steel or titanium.
Measurement Method 量測方法 : UV fluorescence method for polycyclic aromatic hydrocarbons (PAH) 多環芳烴（PAH）的紫外線光學法
Range 量測範圍 :
0 - 500 ppb (µg/L) (PAH) or 0.1 - 15 ppm (mg/L) (Oil)
0 - 5000 ppb (µg/L) (PAH) or 0.1 - 150 ppm (mg/L) (Oil)
Detector 偵測器 : UV photodiode with interference filter; Compensation of daylight and flashlamp intensity fluctuations
Pressure range 壓力範圍 : Max. 30 bar (measurement probe)
Reproducibility : 2.5 % of measured value at constant temperature
Response time 反應時間 : 10 s
Excitation : Wavelength 254 nm
Calibration 校正 : Factory calibrated with UV fluorescence standard or process calibration with results of a grab sample analysis.
Controller compatibility 相容控制主機 : SC4500, SC1000, SC200 使用Hach SC系列 digital controllers 數位水質控制主機進行監控
關鍵字 : 連續監測 水中 油 分析儀, 精密型 水中油 線上監測儀, oil in water analyzer, monitor oil in water, water oil detector, 水中油 偵測, 水 油脂 偵測器
Lowest Cost of Ownership
The FP 360 sc is specifically designed to detect traces of mineral oils in water while providing the necessary value and benefits for a positive return on investment.
The FP 360 sc is specifically designed to detect traces of mineral oils in water while providing the necessary value and benefits for a positive return on investment.
FP 360 sc 專為自動偵測水中微量礦物油而設計，提供最佳效能與效率。
The Right Technology for the Right Price
Due to its unique combination of submersible probe design and UV fluorescence sensing technology, the FP 360 sc delivers the best technology to detect oil in water and is priced below competitive UV fluorescent instruments.
Due to its unique combination of submersible probe design and UV fluorescence sensing technology, the FP 360 sc delivers the best technology to detect oil in water and is priced below competitive UV fluorescent instruments.
FP 360 sc 提供獨特的浸入式探頭設計和紫外線光學感測技術
Minimal Maintenance
The FP 360 sc has no tubes, pumps, or valves that can foul or require constant maintenance interventions. Maintenance is limited to occasional wiping of the sensor's measurement window, calibration once every two years, and Xenon lamp replacement every four years.
The FP 360 sc has no tubes, pumps, or valves that can foul or require constant maintenance interventions. Maintenance is limited to occasional wiping of the sensor's measurement window, calibration once every two years, and Xenon lamp replacement every four years.
無需可能結垢或需要持續維護的管路、幫浦或閥門。維修工作僅需偶爾擦拭感測器的測量窗、每兩年校正一次以及每四年更換一次氙氣燈。
Reduced Laboratory Testing
While laboratory testing is the ultimate method of measuring oil in water, it is a long and complex process that requires special equipment and trained lab personnel. The FP 360 sc provides a cost-effective, continuous online monitoring solution to maintain process control and avoid oil contamination with minimal laboratory testing.
While laboratory testing is the ultimate method of measuring oil in water, it is a long and complex process that requires special equipment and trained lab personnel. The FP 360 sc provides a cost-effective, continuous online monitoring solution to maintain process control and avoid oil contamination with minimal laboratory testing.
可偵測濃度範圍從 1.2 ppb 至 5000 ppb (µg/L) 的多環芳烴 (PAH)。這大約相當於濃度在 0.1 至 150 ppm (mg/L) 之間的礦物油。此外，FP 360 sc 的檢測方法能夠有效抵抗渾濁水質或天然有機物和生物物質的干擾，這些物質會影響線上光散射、紫外吸光度和可見光螢光儀器的測量。
High Sensitivity and Selectivity
The FP 360 sc can detect and measure polycyclic aromatic hydrocarbons (PAHs) from 1.2 ppb to up to 5000 ppb (µg/L). This is approximately equivalent to a concentration of mineral oil between 0.1 to 150 ppm (mg/L). Furthermore, the FP 360 sc method of detection makes it impervious to interferences by turbid water or natural organic and biological matter that impact online light scattering, UV absorbance, and VIS fluorescence instruments.
The FP 360 sc can detect and measure polycyclic aromatic hydrocarbons (PAHs) from 1.2 ppb to up to 5000 ppb (µg/L). This is approximately equivalent to a concentration of mineral oil between 0.1 to 150 ppm (mg/L). Furthermore, the FP 360 sc method of detection makes it impervious to interferences by turbid water or natural organic and biological matter that impact online light scattering, UV absorbance, and VIS fluorescence instruments.
Available in stainless steel or titanium housing for measurement in the harshest of conditions
提供不銹鋼或鈦金屬外殼的材質選項，適用於最嚴苛的水質測量環境
Full Featured “Plug and Play” with Hach Digital Controllers
There’s no complicated wiring or set up procedures with the Hach family of controllers. Just plug the sensor to any Hach digital controller and it’s ready to use because it’s “plug and play.”
There’s no complicated wiring or set up procedures with the Hach family of controllers. Just plug the sensor to any Hach digital controller and it’s ready to use because it’s “plug and play.”
The Hach Digital Controller Family can receive data from up to eight Hach digital sensors, including oil-in-water, suspended solids, turbidity, pH/ORP, dissolved oxygen, conductivity, ammonium, phosphate, SAC, and nitrate in any combination.
Hach SC系列控制器無需複雜的接線或設定程式，僅需將水質感測器連接至任何一台Hach數位控制器即可立即啟用。
SC系列數位控制器最多可同時連接八個Hach 水質感測器，包括水中油、懸浮固體、濁度、pH/ORP、溶氧、導電度、銨、磷酸鹽、SAC 和硝酸鹽的任意組合。