水中總鉻和六價鉻試劑 Chromium TNTplus Vial Test (0.03-1.00 mg/L Cr), 25 Tests
產品編號：TNT854
Expert Hexavalent and Total Chromium test made simple. 水中六價鉻和總鉻分析試劑
Chromium TNTplus® chemistry and your Hach spectrophotometer are engineered to simplify water analysis for accurate results, every time.
Parameter 分析參數 :
Chromium, Hexavalent
Chromium, Total
Method Name 分析方法 : 1,5-Diphenylcarbohydrazide
Method Number 分析方法 : 10218 (Cr6+) 六價鉻
Method Number 2 分析方法 : 10219 (Total Cr) 總鉻
Platform : TNT plus™ Hach 預製試劑
Range 量測範圍：0.03 - 1.00 mg/L Cr
EPA compliant 符合美國環保署測試標準 : Yes
Digestion Required 加熱消解 : Yes for Total
Instrument 分析儀器 : 使用Hach 分光光度計 DR3900, DR6000, DR1900, DR2800, DR3800, DR5000 進行分析
Sample Requirements : The pH of the water sample must be between pH 3 - 9.
The temperature of the water sample and reagents must be between 15 - 35 °C (59 - 95 °F).
關鍵字 : 廢污水 鉻 濃度 分析 試劑, 水 鉻 檢測試劑, 預製水質試劑 環保快速安全, 水中鉻 濃度 分析, 水中六價鉻 濃度分析, 水中 總鉻 濃度 分析, water chromium analysis,
Chromium TNTplus® chemistry and your Hach spectrophotometer are engineered to simplify water analysis for accurate results, every time.
Parameter 分析參數 :
Chromium, Hexavalent
Chromium, Total
Method Name 分析方法 : 1,5-Diphenylcarbohydrazide
Method Number 分析方法 : 10218 (Cr6+) 六價鉻
Method Number 2 分析方法 : 10219 (Total Cr) 總鉻
Platform : TNT plus™ Hach 預製試劑
Range 量測範圍：0.03 - 1.00 mg/L Cr
EPA compliant 符合美國環保署測試標準 : Yes
Digestion Required 加熱消解 : Yes for Total
Instrument 分析儀器 : 使用Hach 分光光度計 DR3900, DR6000, DR1900, DR2800, DR3800, DR5000 進行分析
Sample Requirements : The pH of the water sample must be between pH 3 - 9.
The temperature of the water sample and reagents must be between 15 - 35 °C (59 - 95 °F).
關鍵字 : 廢污水 鉻 濃度 分析 試劑, 水 鉻 檢測試劑, 預製水質試劑 環保快速安全, 水中鉻 濃度 分析, 水中六價鉻 濃度分析, 水中 總鉻 濃度 分析, water chromium analysis,
Easy and safe handling
The innovative vial and reagent delivery makes tests easier to use than powder pillows or liquid reagents and significantly reduces spillage or contamination risk. 創新的預製試劑讓測試操作比粉末試劑或液體試劑更簡便快捷，並降低溢出或污染的風險。
No reagent blank necessary
The high quality of TNTplus vials, tight reagent production controls, instrument calibration verification, and high instrument stability all combine to eliminate the need to run reagent blanks—saving you time and money!
Automatic method detection
The bar-coded vials allow for automatic method detection and measurement by the spectrophotometer, considerably increasing the speed of analysis. Errors are reduced as instrument averages 10 readings and rejects outliers from scratched, flawed, or dirty glassware. 有條碼標記的試劑瓶讓分光光度計可自動方法檢測和測量，進而顯著提高分析速度。儀器透過平均 10 次讀數並剔除因玻璃器皿刮傷、缺陷或髒污造成的異常值來減少誤差。
Documented shelf life and COA
New 2D barcode details batch number and expiry date of reagents, which are documented along with the measurement result. An automatic warning is issued if expiry date has passed. Lot specific information (COA) is available on RFID tag on the box.