水中懸浮固體/濁度/污泥高度監測儀(可攜式) TSS Portable Hand-held Turbidity, Suspended Solids, and Sludge Level System
產品編號LXV322.99.00002
Hach TSS Portable 濁度、懸浮物和污泥高度監測儀對於民生污水、工業廢水、飲用水與河流監測是一款非常理想的遠端監測工具。TSS Portable Hand-held Turbidity, Suspended Solids, and Sludge Blanket Level Instrument

Compact instrument for analytical determination by continuous measurement mode with integration time setting.
Adjustment of up to 5 measuring points, storage of measuring values with name, date and time. Shockproof.
Combined multiple beam alternating light method with infrared diode system and beam focusing; wavelength 860 nm.

The measurement ranges for turbidity and suspended solids are : 0.001 - 9999 FNU and 0.001 - 400 g/L respectively.

Measurement Modes 監測模式 : Continuous measurement, integration time settings 0 - 1000 seconds

TSS Portable 監測儀可做為監測過程的優化工具,也可做為校正或驗證線上感測器的一種簡便方法。

關鍵字 : 水 ss 檢測, 水 ss 監測, 水 ss 分析儀, 懸浮固體 分析儀, 水 污泥高度, 水 濁度 懸浮固體 檢測, Suspended Solids Analyzer
產品特色

Three Parameters in One Instrument  一台儀器可以測量三個參數

The Hach TSS Portable Hand-held Turbidity, Suspended Solids, and Sludge Blanket Level Instrument's unique multi-beam alternating light method with infrared diode system gives it a broad measuring range for both turbidity and suspended solids in one portable handheld instrument.
 
Multiple Calibration Curves for Convenience 多條校正曲線,便於使用
It stores up to four different calibration curves for suspended solids and one for turbidity. There's no need for constant re-calibration for different locations or types of sludge.
 
Easy Sludge Blanket Levels  簡單方便的污泥高度測量
The sludge blanket level can be measured by setting the units to mg/L, g/L or percent. Calibrate the instrument and then slowly lower the sensor into the clarifier. The suspended solids concentration will significantly increase as it reaches the sludge blanket level. Once the blanket level is reached, examine the sensor cable which is marked every meter to determine the sludge blanket level depth from the water surface.
 
Air Bubble Compensation for Accuracy  氣泡補償測量保證更高的精準度
The instrument software automatically compensates for air bubbles to prevent its influence on the measurement. Turbidity is pre-calibrated with a calibration curve stored in the instrument. For suspended solids, each of the calibration curves can be closely adjusted to the laboratory results because each calibration curve can use up to three points per curve plus a zero value.
 
Durable Materials for Long Life  堅固耐用材質,使用壽命長
The probe is made of polished stainless steel with a scratch-resistant sapphire window to withstand harsh environments. Polished stainless steel helps keep particles from sticking to the surface of the probe. The internal memory stores up to 290 measuring values, including time, date, measurement, location, and homogeneity. Three operating modes are available: single, interval, or continuous.
 
Rechargeable Battery Power  使用可充電的電池供電
With rechargeable batteries, the Hach TSS Portable Hand-held Turbidity, Suspended Solids, and Sludge Blanket Level Instrument can provide up to one month of usage in typical measuring mode and up to four hours of continuous operation. Interval mode has automatic shut off between measurements for longer operation in the field. The battery status is always visible. The operating menu is user-friendly and is displayed on an easy-to-read LCD graphic display.
 
Measuring Principle  測試原理 : 
Combined multiple beam alternating light method with infrared diode system and beam focusing.;
Turbidity: 2-channel 90° scattered light measurement in accordance with DIN/EN 27027/ISO 7027;
additional measurement value verification through six-channel multiple-angle measurement;
Solids: Modified absorption measurement; six-channel multiple-angle measurement; 
採用獨特、紅外二極體系統的複合多光束交替光方法,無論是測量水中濁度或測量懸浮固體,量測範圍都更寬廣。