水中臭氧分析儀 9185sc Amperometric Ozone Sensor
產品編號：LXV433.99.00001
Smart amperometric Ozone Analyzer: 9185sc
智慧型安培法水中臭氧分析儀
The 9185sc Ozone Sensor is an online, single-channel industrial sensor that measures ozone in drinking water treatment plants, distribution networks, and other applications that require monitoring of ozone at the ppb and ppm levels. This instrument uses an amperometric method to measure ozone concentration. A membrane allows the selective diffusion of ozone molecules to the amperometric sensor. The measurement is compensated for pH and temperature.
Hach 9185sc 臭氧感測器為單通道工業感測器，採用安培法測量臭氧濃度。監測飲用水處理廠、配水管網、以及其他需要監測 ppb 和 ppm 等級臭氧的濃度。內部膜片能夠讓臭氧分子選擇性地擴散到安培感測器。監測結果經過 pH 值和溫度進行補償。
Parameter 分析參數 : Ozone 臭氧
Measuring principle 量測原理 : Amperometric/Membrane (electrode, membrane, electrolyte) 安培/膜式（電極、膜、電解質）
Range 量測範圍 : 0.005 - 2 mg/L O3
Accuracy 準確度 : 3 % or ± 10 ppb O3, whichever is greater
Lower Limit of Detection (LOD) : 0.005 mg/L ozone (O3)
Standard deviation : 1.0
Response time 反應時間 : 90 % in less than 90 seconds
Measuring Interval : Continuous 連續監測
Calibration method 校正方法 :
Zero Calibration : Electrically or with ozone-free water
Calibration : Comparison of lab method with process sample
Calibration Interval : 2 months
Flow : 14 L/h (200 - 250 mL/min) auto-regulated by flow through cell
Sample Input : 0.25 " outer diameter
Sample Output : 0.5 " inner diameter
Temperature Compensation 溫度補償 : Automatic over sample temperature range
Maintenance Interval : 6 months for membrane and electrolyte (measurement cell)
Interferences : No interference from bromine, chloramines, chlorine, chlorine dioxide, or hydrogen peroxide. 9185 sc 臭氧監測儀不受水樣中的溴、氯胺、氯、二氧化氯或過氧化氫的干擾
Enclosure Rating : IP66 / NEMA 4X
- Few Interferences from Oxidants or pH over a Wide Measurement Range 寬廣量測範圍
- Ideal for Low-Conductivity Samples 適用於低導電度水樣
- Reliable Amperometric Measurements 可靠的電流法測量
- Easy Setup and Maintenance 設定和維護簡單
- Compatible with Hach's "Plug and Play" Digital Controllers 相容Hach SC系列數位控制器
關鍵字 : 水 ozone monitoring, 水 ozone 監測儀, 水 臭氧 線上監測, ozone analyzer, 水中 臭氧 線上分析儀, 水中 臭氧 線上偵測, water ozone detector, 水 線上 臭氧計
智慧型安培法水中臭氧分析儀
The 9185sc Ozone Sensor is an online, single-channel industrial sensor that measures ozone in drinking water treatment plants, distribution networks, and other applications that require monitoring of ozone at the ppb and ppm levels. This instrument uses an amperometric method to measure ozone concentration. A membrane allows the selective diffusion of ozone molecules to the amperometric sensor. The measurement is compensated for pH and temperature.
Hach 9185sc 臭氧感測器為單通道工業感測器，採用安培法測量臭氧濃度。監測飲用水處理廠、配水管網、以及其他需要監測 ppb 和 ppm 等級臭氧的濃度。內部膜片能夠讓臭氧分子選擇性地擴散到安培感測器。監測結果經過 pH 值和溫度進行補償。
Parameter 分析參數 : Ozone 臭氧
Measuring principle 量測原理 : Amperometric/Membrane (electrode, membrane, electrolyte) 安培/膜式（電極、膜、電解質）
Range 量測範圍 : 0.005 - 2 mg/L O3
Accuracy 準確度 : 3 % or ± 10 ppb O3, whichever is greater
Lower Limit of Detection (LOD) : 0.005 mg/L ozone (O3)
Standard deviation : 1.0
Response time 反應時間 : 90 % in less than 90 seconds
Measuring Interval : Continuous 連續監測
Calibration method 校正方法 :
Zero Calibration : Electrically or with ozone-free water
Calibration : Comparison of lab method with process sample
Calibration Interval : 2 months
Flow : 14 L/h (200 - 250 mL/min) auto-regulated by flow through cell
Sample Input : 0.25 " outer diameter
Sample Output : 0.5 " inner diameter
Temperature Compensation 溫度補償 : Automatic over sample temperature range
Maintenance Interval : 6 months for membrane and electrolyte (measurement cell)
Interferences : No interference from bromine, chloramines, chlorine, chlorine dioxide, or hydrogen peroxide. 9185 sc 臭氧監測儀不受水樣中的溴、氯胺、氯、二氧化氯或過氧化氫的干擾
Enclosure Rating : IP66 / NEMA 4X
- Few Interferences from Oxidants or pH over a Wide Measurement Range 寬廣量測範圍
- Ideal for Low-Conductivity Samples 適用於低導電度水樣
- Reliable Amperometric Measurements 可靠的電流法測量
- Easy Setup and Maintenance 設定和維護簡單
- Compatible with Hach's "Plug and Play" Digital Controllers 相容Hach SC系列數位控制器
關鍵字 : 水 ozone monitoring, 水 ozone 監測儀, 水 臭氧 線上監測, ozone analyzer, 水中 臭氧 線上分析儀, 水中 臭氧 線上偵測, water ozone detector, 水 線上 臭氧計
Few Interferences from Oxidants or pH over a Wide Measurement Range
Bromine, chloramines, chlorine, chlorine dioxide, hydrogen peroxide, and pH do not interfere with ozone measurements using the Hach 9185sc Amperometric Ozone Sensor, which can measure from 0 to 2 mg/L ozone
Ideal for Low-Conductivity Samples
The 9185sc ozone system has a low minimum detection limit of 0.005 mg/L ozone. Because the amperometric cell is separated from the sample by the membrane and is immerged into an electrolytic medium, the 9185sc ozone sensor is suitable for use in water with low conductivity.
Reliable Amperometric Measurements
The sensor used in the 9185sc system is a two-electrode amperometric sensor (gold cathode and silver anode) with a membrane selective to ozone. Membranes are pre-mounted on retaining caps to simplify and reduce maintenance time.
Easy Setup and Maintenance
The all-inclusive 9185sc ozone system comes preassembled on a panel. The membrane system of the sensor means there are no chemicals used for measurement.
Compatible with Hach's "Plug and Play" Digital Controllers
The 9185sc Ozone Sensor is designed to be used with all Hach sc digital controllers. Set up is fast and easy, and the system is compatible with the full line of Hach digital sensors
Offers flexible options, including: accidification unit and intermittent flow unit