海水溫度時間記錄儀 SBE 56 Temperature Sensor
產品編號56.1S
Low-cost, high-accuracy, battery-powered temperature and time recorder, with user-programmable sampling interval.
The SBE 56 is a low-cost, high-accuracy, fast-sampling temperature recorder with USB interface, internal battery, and memory. Data are uploaded upon recovery via the internal USB connector, and output in engineering units (degrees C, date and time). The high stability preserves the initial calibration accuracy and means less frequent (or no) calibrations. The SBE 56 delivers this accuracy and stability at a price you would expect for recorders that are less accurate, and is ideal for countless underwater recording applications.
高準確度、快速採樣並由電池供電的溫度記錄儀,USB 介面、內建電池和記憶體。資料恢復後透過內建 USB 介面上傳,並以工程單位(攝氏度、日期和時間)輸出。高穩定度可保持初始校正準確度,無需或僅需更少的校正。 是許多水下記錄應用的理想選擇方案。

Memory capacity exceeds 15 million samples. Battery endurance varies, depending on the sampling scheme. Sampling every 0.5 sec, the SBE 56 can be deployed for 1 month (5.3 million samples). Sampling 4 times per minute, the battery lasts almost 2 years.
儲存容量超過 1500 萬個樣本。電池續航時間視於採樣方案而定。每 0.5 秒採樣一次,SBE 56 可連續使用 1 個月(530 萬個樣本)。每分鐘採樣 4 次,電池續航力可達近 2 年。

Flexible Sampling Options
Autonomous Logging
Fast Data Upload
Data Quality
Long Deployment Endurance

關鍵字 : 海水溫度記錄儀, 海水溫度感測儀
產品介紹
Flexible Sampling Options
Temperature and time, at user-programmable 0.5-sec to 9-hour intervals.
 
Autonomous Logging
Internal memory and battery.
 
Fast Data Upload
Internal USB 2.0 interface; open housing and plug in cable for setup or data upload. Approximately 40 minutes for full memory upload (> 15 million samples).
 
Data Quality
Rigorous 11-point temperature calibration of each sensor.
 
Long Deployment Endurance
Lasts up to 2 years on a single AA lithium cell.