自動換樣器 Titralab AS1000 Series Sample Changer, 12 Positions, 50 & 150 mL Beakers
產品編號：AS1000.97.12150
The AS1000 Sample Changer is the perfect Laboratory assistant by automating analyses on sample series. AS1000 自動進樣器是實驗室的理想助手，可自動完成樣品系列的分析。
The Titralab® AS1000 series is an automatic sample changer used in analytical laboratories in connection with AT1000 Series titrators. The AS1000 is available in four configurations of different tray capacity that holds the sample beakers. The rotating module turns the tray to change the sample position while the lifting module moves sensors and tubes up and down into each sample. The AS1000 ensure automatic stirring of samples thanks to its integrated magnetic stirrer, and rinsing of probes between each sample analyzed thanks to dedicated rinse positions. The AT1000 Series/AS1000 Series setup is entirely PC-controlled with the TM1000 software to automate sample analyses series, and archives results, covering a wide variety of aqueous sample applications such as pH/Conductivity/Alkalinity and Hardness in water, Chlorides content in food products, pH/Acidity in wine and juices, Free & Total SO2 in wine.
Titralab® AS1000 系列自動進樣器適用於分析實驗室，可與 AT1000 系列滴定儀搭配使用。 AS1000 提供四種不同容量的托盤配置，用於放置樣品燒杯。旋轉模組可旋轉托盤以改變樣品位置，而升降模組則可將感測器和導管上下移動到每個樣品中。 AS1000 內建磁力攪拌器，可自動攪拌樣品，並設有專用沖洗位置，可在分析每個樣品之間沖洗探針。 AT1000 系列/AS1000 系列設備完全由 PC 控制，配合 TM1000 軟體自動執行水樣分析，並存檔結果，涵蓋各種水樣應用，例如水中的 pH 值/電導率/鹼度和硬度、食品中的氯化物濃度、葡萄酒和果汁中的 pH 值/酸度、葡萄酒中的遊離二氧化硫和總氧化硫。
Certifications : Safety IEC/EN 61010-1; EMC IEC/EN 61326-1
What's included 包括 : AS1000 Sample Changer contains: Lifting module, Rotating module with carousel tray, support base with magnetic stirrer, probe & tubes holder, RS-232 cable with USB/Serial adapter to connect AS1000 to PC, Power supply, set of magnetic stir bars, set of PP beakers & TM1000 PC-Software with ethernet cables to connect AT1000 to local network or PC.
*另由其他型號款式可選擇
關鍵字 : 實驗室 自動換樣品器, auto sample changer
The Titralab® AS1000 series is an automatic sample changer used in analytical laboratories in connection with AT1000 Series titrators. The AS1000 is available in four configurations of different tray capacity that holds the sample beakers. The rotating module turns the tray to change the sample position while the lifting module moves sensors and tubes up and down into each sample. The AS1000 ensure automatic stirring of samples thanks to its integrated magnetic stirrer, and rinsing of probes between each sample analyzed thanks to dedicated rinse positions. The AT1000 Series/AS1000 Series setup is entirely PC-controlled with the TM1000 software to automate sample analyses series, and archives results, covering a wide variety of aqueous sample applications such as pH/Conductivity/Alkalinity and Hardness in water, Chlorides content in food products, pH/Acidity in wine and juices, Free & Total SO2 in wine.
Titralab® AS1000 系列自動進樣器適用於分析實驗室，可與 AT1000 系列滴定儀搭配使用。 AS1000 提供四種不同容量的托盤配置，用於放置樣品燒杯。旋轉模組可旋轉托盤以改變樣品位置，而升降模組則可將感測器和導管上下移動到每個樣品中。 AS1000 內建磁力攪拌器，可自動攪拌樣品，並設有專用沖洗位置，可在分析每個樣品之間沖洗探針。 AT1000 系列/AS1000 系列設備完全由 PC 控制，配合 TM1000 軟體自動執行水樣分析，並存檔結果，涵蓋各種水樣應用，例如水中的 pH 值/電導率/鹼度和硬度、食品中的氯化物濃度、葡萄酒和果汁中的 pH 值/酸度、葡萄酒中的遊離二氧化硫和總氧化硫。
Certifications : Safety IEC/EN 61010-1; EMC IEC/EN 61326-1
What's included 包括 : AS1000 Sample Changer contains: Lifting module, Rotating module with carousel tray, support base with magnetic stirrer, probe & tubes holder, RS-232 cable with USB/Serial adapter to connect AS1000 to PC, Power supply, set of magnetic stir bars, set of PP beakers & TM1000 PC-Software with ethernet cables to connect AT1000 to local network or PC.
*另由其他型號款式可選擇
關鍵字 : 實驗室 自動換樣品器, auto sample changer
Run sample analyses in total autonomy, without user intervention
The rotating module turns the tray to change the sample position while the lifting module moves sensors and tubes up and down into each sample. Single-radius sample trays for up to 30 samples.
The rotating module turns the tray to change the sample position while the lifting module moves sensors and tubes up and down into each sample. Single-radius sample trays for up to 30 samples.
旋轉模組轉動托盤以改變樣品位置，而升降模組則上下移動感測器和試管浸入每個樣品。單半徑樣品托盤最多可容納 30 個樣品。
Complete automation to free up your time
AS1000 Sample Changer multi-parameter automation solutions release operators’ time from cumbersome repetitive analyses for more valuable tasks that cannot be automated.
AS1000 Sample Changer multi-parameter automation solutions release operators’ time from cumbersome repetitive analyses for more valuable tasks that cannot be automated.
AS1000 自動換樣器讓操作人員不用耗費時間於繁瑣重複工作，而能夠處理其他無法自動化和更提升價值的任務。