The EZ1035sc Silica analyzer delivers reliable and precise silica measurement in water, helping industrial and wastewater facilities optimize processes, prevent equipment damage, and ensure compliance. With the built-in SC4500 Controller, it offers easy operation and straightforward monitoring. Designed for seamless integration and durability, this analyzer is a must-have for professionals who value efficiency and accuracy.
EZ1035sc 二氧化矽分析儀精確穩定可靠監測水中二氧化矽濃度，協助工業和廢汙水處理設施優化過程、防止設備損壞並保持合規性。內建 SC4500 數位控制器，操作簡單，輕鬆監控。設計兼顧無縫整合和耐用性，是高效率和準確度的專業水質監測的理想選擇。

Flexible Customization 彈性配置
Customize the EZ1035sc Silica analyzer to meet your needs. The standard model supports one stream but can be upgraded to handle four or eight streams with 4x or 8x mA outputs. Designed for integration and scalability, it offers versatile connectivity options like Modbus RTU, Modbus TCP/IP, Profibus DP, and Ethernet/IP, making it highly adaptable.

Reliable and Easy to Use 穩定可靠 簡單操作
Built with reliability in mind, the EZ1035sc Silica analyzer delivers consistent, high-accuracy results while minimizing downtime. Its intuitive design simplifies setup and operation, even for complex tasks, allowing you to focus on critical processes. With low-maintenance requirements and a durable build, this analyzer ensures uninterrupted performance even in demanding environments.

Explore Tailored Solutions 彈性擴展可行性
Every facility is unique, and the EZ1035sc Silica analyzer is designed with that in mind. Fully customizable to meet your specific needs, this advanced solution can help you optimize processes, boost efficiency, and ensure confident compliance. Contact us today to discuss your requirements and explore how the EZ1035sc can transform your operations.

Certifications : CE compliant / ETL certified

Parameter 分析參數 : Silica

Measurement Method 量測方法 : Molybdate colorimetric method 比色法

Range 量測範圍 :
No Dilution
0.005 - 0.25 mg/L SiO₂
0.005 - 0.5 mg/L SiO₂
0.01 - 1 mg/L SiO₂

Internal Dilution
0.05 - 5 mg/L SiO₂
0.1 - 10mg/L SiO₂
0.25 - 25 mg/L SiO₂
0.5 - 50 mg/L SiO₂
0.75 - 75 mg/L SiO₂
1 - 100 mg/L SiO₂

Lower Limit of Detection (LOD) :
No Dilution
0.005 - 0.25 mg/L SiO₂: 0.005 mg/L
0.005 - 0.5 mg/L SiO₂: 0.005 mg/L
0.01 - 1 mg/L SiO₂: 0.01 mg/L

Internal Dilution
0.05 - 5 mg/L SiO₂: 0.05 mg/L
0.1 - 10mg/L SiO₂: 0.1 mg/L
0.25 - 25 mg/L SiO₂: 0.25 mg/L
0.5 - 50 mg/L SiO₂: 0.5 mg/L
0.75 - 75 mg/L SiO₂: 0.75 mg/L
1 - 100 mg/L SiO₂: 1 mg/L

Precision : Better than 2% full scale range for standard test solutions

Sample Flow Rate : 100 - 300 mL/min

Sample Quality : Maximum particle size 100 µm, < 0.1 g/L; Turbidity < 50 NTU

Cycle Time :
No Dilution
Default: 10 min.
Continuous: 10 min.

Internal Dilution
Default: 15 min.
Continuous: 13 min.

Automatic cleaning 自動清潔 : Yes; Frequency freely programmable: 6 hours, 12 hours, daily, weekly

Calibration 校正 :
Automatic; 2-point; offset or slope; Frequency freely programmable: 6 hours, 12 hours, daily, weekly. Note: manufacturer recommends that a calibration is done when the reagents are replaced

Validation : Automatic; frequency freely programmable

Number of sample streams 水樣流 : Standard: 1
Optional accessory for 2, 4, or 8 sample streams

Analog Outputs 類比輸出 : Active 4 - 20 mA max. 500 Ohm load, standard 4, max. 8 (option)

Digital Outputs 數位輸出 : None
Optional: Modbus (TCP/IP, RTU), Profinet, Profibus DP, Ethernet IP

關鍵字 : 水 二氧化矽 自動監測, 水 二氧化矽 連續監測儀, online silica monitoring, 水 silica monitoring, 水 二氧化矽 自動分析儀, 硅 分析儀, online silica analyzer, SiO2 analyzer, SiO2 sensor, SiO2 濃度監測