水中磷分析儀 Phosphax sigma Online Phosphate Analyzer
產品編號:
Phosphax Sigma 線上總磷分析儀自動監測地面水、廢污水中的總磷濃度;工業循環水總磷/正磷/有機磷的連續自動監測。
Phosphax sigma - the P-analyzer for in-house measurement with digestion 配備消解裝置
The process photometer is designed for determination of the total phosphorus content and the orthophosphate concentration (0.01-5 mg/L). Analysis is based on the DIN EN ISO 6878 Phosphormolybdenum blue method.
Polyphosphates and some organic phosphorus compounds are hydrolyzed to orthophosphate by boiling in strong acid solution, and stable phosphorus compounds are reacted by sodium peroxydisulphate. The chemo-thermic reaction principle ensures complete breakdown within a few minutes. The measured values are indicated via a liquid crystal display (graphics display) as mg/l total P and mg/l orthophosphate. Solid-containing samples must be homogenized before entering the process photometer. 化學熱反應原理得以在幾分鐘內完全分解。測量數據透過液晶顯示螢幕(圖形顯示)以 mg/l 總磷和 mg/l 正磷酸鹽的單位顯示。含固體的水樣須先進行均質處理。
Measuring range : 0.01 - 5 mg/L for ortho-phosphate and total phosphorus
Measuring principle : Photometric method, according to DIN 38405 D11 (reduction- / blue- method)
Measuring interval : 10 min
Calibration method : automatic, intervals selectable
Current output : 0/4 to 20 mA max. 500 Ω; 2 current outputs
Interface : Service Interface: RS 232 with bus capability (option)
Sample volume : 100 mL/h
Service interval : 3 months
根據 EN 1189 標準,採用鉬藍法高準確度偵測水中總磷和正磷酸鹽濃度。僅需10分鐘左右。配備樣品預處理系統及防護面板,自動校正自動清洗,可以圖形或資料顯示監測結果。
關鍵字 : 水中 磷 線上分析儀, 線上監測 水中 磷 濃度, 水中磷 自動監測儀, wastewater phosphate analyzer, cooling water phosphate analyzer, 冷卻水 磷 濃度 偵測.
Phosphax sigma - the P-analyzer for in-house measurement with digestion 配備消解裝置
The process photometer is designed for determination of the total phosphorus content and the orthophosphate concentration (0.01-5 mg/L). Analysis is based on the DIN EN ISO 6878 Phosphormolybdenum blue method.
Polyphosphates and some organic phosphorus compounds are hydrolyzed to orthophosphate by boiling in strong acid solution, and stable phosphorus compounds are reacted by sodium peroxydisulphate. The chemo-thermic reaction principle ensures complete breakdown within a few minutes. The measured values are indicated via a liquid crystal display (graphics display) as mg/l total P and mg/l orthophosphate. Solid-containing samples must be homogenized before entering the process photometer. 化學熱反應原理得以在幾分鐘內完全分解。測量數據透過液晶顯示螢幕(圖形顯示)以 mg/l 總磷和 mg/l 正磷酸鹽的單位顯示。含固體的水樣須先進行均質處理。
Measuring range : 0.01 - 5 mg/L for ortho-phosphate and total phosphorus
Measuring principle : Photometric method, according to DIN 38405 D11 (reduction- / blue- method)
Measuring interval : 10 min
Calibration method : automatic, intervals selectable
Current output : 0/4 to 20 mA max. 500 Ω; 2 current outputs
Interface : Service Interface: RS 232 with bus capability (option)
Sample volume : 100 mL/h
Service interval : 3 months
根據 EN 1189 標準,採用鉬藍法高準確度偵測水中總磷和正磷酸鹽濃度。僅需10分鐘左右。配備樣品預處理系統及防護面板,自動校正自動清洗,可以圖形或資料顯示監測結果。
關鍵字 : 水中 磷 線上分析儀, 線上監測 水中 磷 濃度, 水中磷 自動監測儀, wastewater phosphate analyzer, cooling water phosphate analyzer, 冷卻水 磷 濃度 偵測.
Measurement of Total Phosphorus and Orthophosphate in 1 instrument
Fast measurement in just 10 minutes
Complete digestion
Low consumption of reagents
Automatic cleaning and calibration
Without sample filtration
● 單一儀器自動分析總磷及正磷,並直接顯示出含磷緩蝕阻垢劑濃度
● 採用符合標準方法的鉬藍法測量
● 反應速度快,總磷濃度測定僅需10分鐘
● 自動校正功能,準確度高
● 自動清洗功能,維護需求量小
● 配置安全防護面板,安全性高
● 總磷測定結果可以圖形或數據顯示
