水中導電度線上感測器 Analog Boiler/Condensate Conductivity Sensor, Cell Constant 5.0, Stainless Steel Body, Polypropylene HD
產品編號：3444D8B
Nominal Cell Constant (K) = 5.0, 3/4 inch male NPT threaded 316 stainless steel body, Polypropylene Junction Box with 3/4" NPT Conduit Connection - Requires 1W1100 Interconnect Cable, Titanium Electrode, Generic ID
Range : 0 - 10000 µS/cm
These enhanced performance sensors are manufactured to exacting tolerances using high quality, rugged materials for demanding applications including ultra-pure water, clean-in-place (CIP), and boiler/condensate monitoring.
針對嚴苛應用而設計，例如 : 超純水、原地清洗 (CIP) 和鍋爐水/冷凝水監測
*需搭配Hach Controllers 控制主機使用
Range : 0 - 10000 µS/cm
These enhanced performance sensors are manufactured to exacting tolerances using high quality, rugged materials for demanding applications including ultra-pure water, clean-in-place (CIP), and boiler/condensate monitoring.
針對嚴苛應用而設計，例如 : 超純水、原地清洗 (CIP) 和鍋爐水/冷凝水監測
*需搭配Hach Controllers 控制主機使用
High Performance Design 高效能設計
These enhanced performance sensors are manufactured to exacting tolerances using high quality, rugged materials for demanding applications including ultra-pure water, clean-in-place (CIP), and boiler/condensate monitoring. Each sensor is tested to determine its unique, absolute four-digit cell constant. Also, each sensor has a Pt 1000 RTD temperature element built into its tip for exceptionally fast response to changes in temperature with ±0.1ºC accuracy.
These enhanced performance sensors are manufactured to exacting tolerances using high quality, rugged materials for demanding applications including ultra-pure water, clean-in-place (CIP), and boiler/condensate monitoring. Each sensor is tested to determine its unique, absolute four-digit cell constant. Also, each sensor has a Pt 1000 RTD temperature element built into its tip for exceptionally fast response to changes in temperature with ±0.1ºC accuracy.
Resistivity and Conductivity Measurement Capability 電阻和導電度量測能力
These enhanced performance sensors measure from theoretically pure water (0.057 µS/cm or 18.2 MΩ) up to 200,000 µS/cm. Hach’s sc Digital Controllers accept multiple digital sensor inputs, and can be user-set to measure conductivity, resistivity,TDS, salinity, or one of six calculated measurements.
These enhanced performance sensors measure from theoretically pure water (0.057 µS/cm or 18.2 MΩ) up to 200,000 µS/cm. Hach’s sc Digital Controllers accept multiple digital sensor inputs, and can be user-set to measure conductivity, resistivity,TDS, salinity, or one of six calculated measurements.
Versatile Mounting Styles 多種安裝方式
High pressure and high temperature sensors are designed for monitoring boiler water and condensate in return lines. They have 316 stainless steel electrodes and threaded bodies (3/4-inch male NPT). They can be fastened into a boiler wall using a 3/4-inch weldolet or mounted into a process line using a standard 3/4-inch stainless pipe tee.
Full-Featured “Plug and Play” Hach sc Digital Controllers 與Hach SC系列數位控制主機相容, 感測器連接至控制主機即可使用
There are no complicated wiring or set up procedures with any Hach sc controller. Just plug in any combination of Hach digital sensors and it's ready to use—it’s “plug and play.”