水中COD分析試劑(超高濃度) Chemical Oxygen Demand (COD) TNTplus Vial Test, UHR (250-15,000 mg/L COD), 25 Tests
產品編號：TNT823
Chemical Oxygen Demand - Expert Ultra High Range COD test made simple.
Recommended COD test for high concentrations in wastewater influent.
The Chemical Oxygen Demand analysis provides important information for the water treatment process and is essential to calculate the BOD COD ratio in wastewater. Due to this, the COD is one of the most frequently analyzed wastewater parameters globally.
Why should you use Hach TNTplus® COD tests?
Hach TNTplus COD vial test reagents are incredibly simple to use and cut down significantly on waste generation compared to other COD test kits. TNT823 is based on Hach Method 10212 for virtually any type of water sample.
Hach TNTplus COD vial tests are available in multiple ranges. TNT823 provides a result in the Ultra High Range of 250 - 15,000 mg/L COD and is often used for Chemical Oxygen Demand measurement in industrial wastewater influent. Hach TNT823 does not require a separate blanking vial for further waste reduction and is compatible with our ezCOD Waste Recycling Service for further peace of mind. Make the switch to TNTplus COD reagents today!
Method
For determination of Chemical Oxygen Demand (COD) by the Reactor Digestion Method. Simply pipette in sample, digest, and read in your Hach Spectrophotometer. 25 tests per box.
Recommended instruments 推薦搭配儀器 :
DR3900 分光光度計
DR6000 紫外線分光光度計
DRB200 試劑加熱器
Benefits of Hach TNTplus COD test kits:
- Easy and safe handling
- No reagent blank necessary
- Automatic method detection
- Documented shelf life and COA
關鍵字 : 廢水 COD 濃度 檢測試劑, 污水 COD 分析試劑, 污水 化學需氧量 分析試劑
Recommended COD test for high concentrations in wastewater influent.
The Chemical Oxygen Demand analysis provides important information for the water treatment process and is essential to calculate the BOD COD ratio in wastewater. Due to this, the COD is one of the most frequently analyzed wastewater parameters globally.
Why should you use Hach TNTplus® COD tests?
Hach TNTplus COD vial test reagents are incredibly simple to use and cut down significantly on waste generation compared to other COD test kits. TNT823 is based on Hach Method 10212 for virtually any type of water sample.
Hach TNTplus COD vial tests are available in multiple ranges. TNT823 provides a result in the Ultra High Range of 250 - 15,000 mg/L COD and is often used for Chemical Oxygen Demand measurement in industrial wastewater influent. Hach TNT823 does not require a separate blanking vial for further waste reduction and is compatible with our ezCOD Waste Recycling Service for further peace of mind. Make the switch to TNTplus COD reagents today!
Method
For determination of Chemical Oxygen Demand (COD) by the Reactor Digestion Method. Simply pipette in sample, digest, and read in your Hach Spectrophotometer. 25 tests per box.
Recommended instruments 推薦搭配儀器 :
DR3900 分光光度計
DR6000 紫外線分光光度計
DRB200 試劑加熱器
Benefits of Hach TNTplus COD test kits:
- Easy and safe handling
- No reagent blank necessary
- Automatic method detection
- Documented shelf life and COA
關鍵字 : 廢水 COD 濃度 檢測試劑, 污水 COD 分析試劑, 污水 化學需氧量 分析試劑
Easy and safe handling
The innovative vial and reagent delivery makes tests easier to use than powder pillows or liquid reagents and significantly reduces spillage or contamination risk.
The innovative vial and reagent delivery makes tests easier to use than powder pillows or liquid reagents and significantly reduces spillage or contamination risk.
No reagent blank necessary
The high quality of TNTplus vials, tight reagent production controls, instrument calibration verification, and high instrument stability all combine to eliminate the need to run reagent blanks—saving you time and money!
Automatic method detection
The bar-coded vials allow for automatic method detection and measurement by the spectrophotometer, considerably increasing the speed of analysis. Errors are reduced as instrument averages 10 readings and rejects outliers from scratched, flawed, or dirty glassware.
Documented shelf life and COA
New 2D barcode details batch number and expiry date of reagents, which are documented along with the measurement result. An automatic warning is issued if expiry date has passed. Certificate of Analysis (COA) is available on RFID tag on the box.
The high quality of TNTplus vials, tight reagent production controls, instrument calibration verification, and high instrument stability all combine to eliminate the need to run reagent blanks—saving you time and money!
Automatic method detection
The bar-coded vials allow for automatic method detection and measurement by the spectrophotometer, considerably increasing the speed of analysis. Errors are reduced as instrument averages 10 readings and rejects outliers from scratched, flawed, or dirty glassware.
Documented shelf life and COA
New 2D barcode details batch number and expiry date of reagents, which are documented along with the measurement result. An automatic warning is issued if expiry date has passed. Certificate of Analysis (COA) is available on RFID tag on the box.
