水中超低濃度總氯監測儀 Ultra Low Range CL17sc Total Chlorine Analyzer with Standpipe Installation Kit and SC4500 Controller
產品編號：9792500
Total chlorine confidence. From the global leader in chlorine analysis.
精確穩定可靠的總氯濃度監測方案來自全球氯分析領域的領導品牌。
Meet your unique water cycle needs with the new Ultra Low Range CL17sc online total chlorine analyzer from Hach. Whether treating utility water, product water, or wastewater discharge, you’ll have the direct chlorine measurements you need to optimize your process. You’ll be able to protect valuable assets and report to regulatory agencies with confidence.
Hach CL17sc 超低濃度總氯線上分析儀滿足您獨特的水循環需求。無論您處理的是公用事業用水、產品用水或廢汙水排放，都能提供您所需精確穩定可靠的氯濃度測量數據，協助您優化過程，保護廠區內的設備資產，並安心地向水質監管單位提交水質數據結果。
Applications 應用 : Boiler Water, Discharge, Filtration, Groundwater, Membrane Protection, Municipal Water, Potable Water, Pre-Treatment, Product Loss, Surface Water
Parameter 分析參數 : Chlorine, total residual
Light Source 光源 : LED, measurement at 510 nm, 1 cm light pathlength
Certifications 認證 :
CE compliant with: EN 61326-1, CISPR 11, EN 50581
ACMA RCM
South Korea KC Certificate
North America: FCC Supplier’s Declaration of Conformance, IEC/EN 60529, ICES-003
Range 量測範圍 : 0.008 - 5 mg/L Cl₂
Accuracy : ± 5% or ± 0.01 mg/L (whichever is greater) from 0 - 4 mg/L; ± 10% from 4 - 5 mg/L
Lower Limit of Detection (LOD) : 0.008 mg/L Cl₂ at 25 °C
Sample Flow Rate : 60 - 200 mL/min through the instrument
Sample Requirements : Y-strainer filtration with 40-mesh screen or higher
Sample Temperature : 5 - 40 °C (41 - 104 °F)
Cycle Time : 2.5 minutes
Interferences : Other oxidizing agents such as bromide, chlorine dioxide, permanganate, and ozone will cause a positive interference.
Air Purge : Optional with 3/8-inch quick-connect fitting and tubing; 0.003 m3/min at 1.38 bar (20 psig) maximum
Alerts 警示 : Low and high chlorine. Dirty cell. Low and high sample flow.
What's included 內容物 : ULR CL17sc Chlorine Analyzer with Standpipe Installation Kit (9790200); SC4500 Controller for 2 digital sensors, Prognosys, 5x mA Output, 100-240 VAC, without power cord (LXV525.99A11551); User Manual
關鍵字 : Chlorine analyzer, Chlorine sensor, 水中超低濃度總氯分析儀, 監測 超低濃度總氯
精確穩定可靠的總氯濃度監測方案來自全球氯分析領域的領導品牌。
Meet your unique water cycle needs with the new Ultra Low Range CL17sc online total chlorine analyzer from Hach. Whether treating utility water, product water, or wastewater discharge, you’ll have the direct chlorine measurements you need to optimize your process. You’ll be able to protect valuable assets and report to regulatory agencies with confidence.
Hach CL17sc 超低濃度總氯線上分析儀滿足您獨特的水循環需求。無論您處理的是公用事業用水、產品用水或廢汙水排放，都能提供您所需精確穩定可靠的氯濃度測量數據，協助您優化過程，保護廠區內的設備資產，並安心地向水質監管單位提交水質數據結果。
Applications 應用 : Boiler Water, Discharge, Filtration, Groundwater, Membrane Protection, Municipal Water, Potable Water, Pre-Treatment, Product Loss, Surface Water
Parameter 分析參數 : Chlorine, total residual
Light Source 光源 : LED, measurement at 510 nm, 1 cm light pathlength
Certifications 認證 :
CE compliant with: EN 61326-1, CISPR 11, EN 50581
ACMA RCM
South Korea KC Certificate
North America: FCC Supplier’s Declaration of Conformance, IEC/EN 60529, ICES-003
Range 量測範圍 : 0.008 - 5 mg/L Cl₂
Accuracy : ± 5% or ± 0.01 mg/L (whichever is greater) from 0 - 4 mg/L; ± 10% from 4 - 5 mg/L
Lower Limit of Detection (LOD) : 0.008 mg/L Cl₂ at 25 °C
Sample Flow Rate : 60 - 200 mL/min through the instrument
Sample Requirements : Y-strainer filtration with 40-mesh screen or higher
Sample Temperature : 5 - 40 °C (41 - 104 °F)
Cycle Time : 2.5 minutes
Interferences : Other oxidizing agents such as bromide, chlorine dioxide, permanganate, and ozone will cause a positive interference.
Air Purge : Optional with 3/8-inch quick-connect fitting and tubing; 0.003 m3/min at 1.38 bar (20 psig) maximum
Alerts 警示 : Low and high chlorine. Dirty cell. Low and high sample flow.
What's included 內容物 : ULR CL17sc Chlorine Analyzer with Standpipe Installation Kit (9790200); SC4500 Controller for 2 digital sensors, Prognosys, 5x mA Output, 100-240 VAC, without power cord (LXV525.99A11551); User Manual
關鍵字 : Chlorine analyzer, Chlorine sensor, 水中超低濃度總氯分析儀, 監測 超低濃度總氯
Monitor and Optimize your Dechlorination process
Chlorine breakthroughs can adversely affect your process, product, or equipment. You’ll be able to mitigate issues and optimize your process with the Hach Ultra Low Range CL17sc analyzer, which has the lowest limit of detection at less than 8 ppb. It's time to accurately measure your total residual chlorine and take control of your dechlorination process.
Chlorine breakthroughs can adversely affect your process, product, or equipment. You’ll be able to mitigate issues and optimize your process with the Hach Ultra Low Range CL17sc analyzer, which has the lowest limit of detection at less than 8 ppb. It's time to accurately measure your total residual chlorine and take control of your dechlorination process.
Depend on direct measurements
Online residual chlorine measurement options for ultra-low range have been either inadequate or inefficient – until now. The Ultra Low Range CL17sc gives you direct total chlorine results, eliminating the need for ORP or amperometric measurement. The Ultra Low Range CL17sc uses colorimetric DPD Standard Method 4500-Cl G and consistently maintains accuracy without loss of sensitivity in your new target range.
Online residual chlorine measurement options for ultra-low range have been either inadequate or inefficient – until now. The Ultra Low Range CL17sc gives you direct total chlorine results, eliminating the need for ORP or amperometric measurement. The Ultra Low Range CL17sc uses colorimetric DPD Standard Method 4500-Cl G and consistently maintains accuracy without loss of sensitivity in your new target range.
Protect your assets
Understand the true impact of chlorine exposure. The Ultra Low Range CL17sc allows for process control across your water cycle, including visibility into GAC exhaustion or channeling and dechlorinating agent dosage. It is the only instrument with a cumulative chlorine counter, which helps you forecast your RO membrane efficiency and its useful life.
Understand the true impact of chlorine exposure. The Ultra Low Range CL17sc allows for process control across your water cycle, including visibility into GAC exhaustion or channeling and dechlorinating agent dosage. It is the only instrument with a cumulative chlorine counter, which helps you forecast your RO membrane efficiency and its useful life.
Smart Monitoring Enabled
The new Ultra Low Range CL17sc analyzer is Smart Monitoring enabled, providing real-time visibility into your processes so you can optimize and automate your chlorination/dechlorination. You’ll have peace of mind and more time to focus on high-value tasks.
The new Ultra Low Range CL17sc analyzer is Smart Monitoring enabled, providing real-time visibility into your processes so you can optimize and automate your chlorination/dechlorination. You’ll have peace of mind and more time to focus on high-value tasks.