Online ion-selective Chloride measurements with standard addition for industrial applications
適用於工業應用的水中氯化物濃度監測（線上離子選擇性方法）
ISE technology for complex water matrices 適用於複雜水樣的離子選擇性電極 (ISE) 技術
The EZ3500 Series are used for water monitoring applications where ion-selective electrodes are the preferred analytical technique, but the water matrix is complex. Standard addition helps minimize matrix interferences that otherwise might contribute to the output signal of the electrode. 對於複雜水體中，離子選擇性電極是首選的分析技術，標準添加法協助大幅減少基質干擾，以避免影響電極的輸出訊號。

Discontinuous, automatic standard addition 間歇式自動標準添加
The EZ3500 Series run discontinuous measurements with careful addition of a known standard in an analysis vessel. Discontinuous ISE analysis enhances control over the potentiometry, eliminates cross-contamination between cycles and reduces overall reagent consumption.

Certifications : CE compliant / UL certified

Parameter 分析參數 : Chloride 氯化物

Method Name 量測方法 : Ion selective (standard addition)

Measurement Method 量測方法 : Discontinuous measurement by combined ion-selective electrode with standard addition

Range 量測範圍 : 50 - 1000 mg/L Cl-
Optional:
10 - 250 mg/L Cl-
25 - 500 mg/L Cl-

Lower Limit of Detection (LOD) : 10 mg/L

Precision : Better than 2% full scale range for standard test solutions

Sample Flow Rate : 100 - 300 mL/min

Cycle Time : 8 minutes

Calibration 校正 : Automatic, 2-point; frequency freely programmable

Automatic cleaning 自動清潔 : Yes

There are many additional options available. Please contact Hach for more details.

關鍵字 : 氯化物 濃度 分析, 水中氯化物分析儀, 水 氯 監測儀, Chloride sensor,