水中懸浮固體/濁度感測器 Solitax ts-line sc Turbidity (0.001-4000 NTU) and Suspended Solids (0.001-50 g/L) immersion probe, with wiper, stainless steel
產品編號：LXV423.99.00100
Hach Solitax sc 懸浮固體分析儀採用創新雙光束紅外和散射光光度計偵測技術，可檢測懸浮物/污泥濃度，評估活性污泥品質。
Accurate, color-independent suspended solids and turbidity measurements 準確、不受顏色影響的懸浮物和濁度線上監測
The Solitax ts-line sc turbidity and suspended solids immersion probe provides high-precision results in clear to strongly turbid liquids as well as in low and medium concentrated sludges. Turbidity measurement performance is certified to MCERTS regulation and the probe operates with a 90° measuring method according to DIN EN ISO 7027. The suspended solids measurement by a color-independent method with an infrared duo scattered light photometer is in accordance with DIN 38414. A proven automatic wiper cleaning system allows sustained performance quality in drinking water as well as in waste water applications. The Solitax ts-line sc probe material is stainless steel and measurement data is displayed and processed with the help of a digital Hach SC series controller. Solitax ts-line sc 濁度和懸浮物浸入式感測器可於清澈至強濁度的液體以及低濃度和中等濃度的污泥中提供高準確度監測數據。濁度測量效能通過 MCERTS 認證，探頭採用符合 DIN EN ISO 7027 標準的 90° 測量方法。懸浮物測量採用不受顏色影響的紅外線雙散射光光度計方法，符合 DIN 38414 標準。自動刮水器清潔系統確保在飲用水和廢污水應用持續穩定的效能。 Solitax ts-line sc 感測器採用不鏽鋼材質，間測數據透過 Hach SC 系列數位控制器進行顯示和處理。
Furthermore, the Solitax ts-line sc turbidity immersion probe is compatible for Prognosys which is a predictive diagnostic system that allows you to be proactive in your maintenance, by alerting you to upcoming instrument issues.
與 Hach Prognosys 智慧預測維護診斷軟體系統相容，能提醒您即將出現的儀器問題，讓您在維護方面擁有主動性。
Parameter 分析參數： Suspended Solids, Turbidity 懸浮固體, 濁度
Measuring Principle 量測原理： Infrared Duo scattered light technique for color-independent turbidity measurement Turbidity in accordance with DIN EN ISO 7027 / TS equivalent DIN 38414
Range 量測範圍：
TSS content: 0.001 mg/L - 50 g/L
Turbidity: 0.001 - 4000 NTU
Accuracy： Turbidity up to 1000 NTU:
without calibration < 5% of the measured value ±0.01 NTU
with calibration < 1% of the measured value ±0.01 NTU
Repeatability：
TSS content: < 3%
Turbidity: < 1%
Response Time T90 1 - 300 s adjustable
Flow： Max. 3 m/s (the presence of air bubbles affects the measurement)
Automatic Wiper： Yes
Calibration Method 校正：
Turbidity: Formazin or Stablcal Standard (at 800 NTU).
Suspended Solids: Sample specific, based on gravimetric TSS analysis with a correction factor procedure.
Controller Compatibility 相容控制器 : SC4500, SC1000, SC200
關鍵字 : 懸浮固體 線上監測, 懸浮固體 線上分析儀, 汙泥介面 監測, 污泥界面 分析儀, ss檢測, 水 ss監測, 水 ss分析 儀, Suspended Solids Analyzer, 線上 濁度計, 線上 懸浮固體 分析儀, 連續檢測懸浮物, 連續監測水中懸浮物, 水中懸浮物 偵測
Accurate, color-independent suspended solids and turbidity measurements 準確、不受顏色影響的懸浮物和濁度線上監測
The Solitax ts-line sc turbidity and suspended solids immersion probe provides high-precision results in clear to strongly turbid liquids as well as in low and medium concentrated sludges. Turbidity measurement performance is certified to MCERTS regulation and the probe operates with a 90° measuring method according to DIN EN ISO 7027. The suspended solids measurement by a color-independent method with an infrared duo scattered light photometer is in accordance with DIN 38414. A proven automatic wiper cleaning system allows sustained performance quality in drinking water as well as in waste water applications. The Solitax ts-line sc probe material is stainless steel and measurement data is displayed and processed with the help of a digital Hach SC series controller. Solitax ts-line sc 濁度和懸浮物浸入式感測器可於清澈至強濁度的液體以及低濃度和中等濃度的污泥中提供高準確度監測數據。濁度測量效能通過 MCERTS 認證，探頭採用符合 DIN EN ISO 7027 標準的 90° 測量方法。懸浮物測量採用不受顏色影響的紅外線雙散射光光度計方法，符合 DIN 38414 標準。自動刮水器清潔系統確保在飲用水和廢污水應用持續穩定的效能。 Solitax ts-line sc 感測器採用不鏽鋼材質，間測數據透過 Hach SC 系列數位控制器進行顯示和處理。
Furthermore, the Solitax ts-line sc turbidity immersion probe is compatible for Prognosys which is a predictive diagnostic system that allows you to be proactive in your maintenance, by alerting you to upcoming instrument issues.
與 Hach Prognosys 智慧預測維護診斷軟體系統相容，能提醒您即將出現的儀器問題，讓您在維護方面擁有主動性。
Parameter 分析參數： Suspended Solids, Turbidity 懸浮固體, 濁度
Measuring Principle 量測原理： Infrared Duo scattered light technique for color-independent turbidity measurement Turbidity in accordance with DIN EN ISO 7027 / TS equivalent DIN 38414
Range 量測範圍：
TSS content: 0.001 mg/L - 50 g/L
Turbidity: 0.001 - 4000 NTU
Accuracy： Turbidity up to 1000 NTU:
without calibration < 5% of the measured value ±0.01 NTU
with calibration < 1% of the measured value ±0.01 NTU
Repeatability：
TSS content: < 3%
Turbidity: < 1%
Response Time T90 1 - 300 s adjustable
Flow： Max. 3 m/s (the presence of air bubbles affects the measurement)
Automatic Wiper： Yes
Calibration Method 校正：
Turbidity: Formazin or Stablcal Standard (at 800 NTU).
Suspended Solids: Sample specific, based on gravimetric TSS analysis with a correction factor procedure.
Controller Compatibility 相容控制器 : SC4500, SC1000, SC200
關鍵字 : 懸浮固體 線上監測, 懸浮固體 線上分析儀, 汙泥介面 監測, 污泥界面 分析儀, ss檢測, 水 ss監測, 水 ss分析 儀, Suspended Solids Analyzer, 線上 濁度計, 線上 懸浮固體 分析儀, 連續檢測懸浮物, 連續監測水中懸浮物, 水中懸浮物 偵測
Greater accuracy, less maintenance
Hach Solitax sc sensors provide accurate, colour-independent measurement of turbidity and suspended solids in drinking water, wastewater and industrial process applications. A self-cleaning device prevents biological growth and interference of gas bubbles. This system’s reliable performance and full data communication capability help improve process control and reduce treatment costs associated with polymer use, digester volume, and sludge handling.
Excellent correlation to laboratory analysis
Solitax sc sensors show an exceptional correlation to laboratory analysis. On-line measurement not only saves time on manual analysis, but also provides critical real-time measurements that can be used to operate the plant more efficiently.
Solitax sc sensors show an exceptional correlation to laboratory analysis. On-line measurement not only saves time on manual analysis, but also provides critical real-time measurements that can be used to operate the plant more efficiently.
Fully serviceable sensors
Conventional turbidity and suspended solids sensors are potted and are discarded when they no longer function. Solitax sc sensors are fully serviceable, which often doubles the useful life of the sensor.
Conventional turbidity and suspended solids sensors are potted and are discarded when they no longer function. Solitax sc sensors are fully serviceable, which often doubles the useful life of the sensor.
Easy one-point calibration
Factory calibrated in conformity with DIN EN ISO 7027 for long-term calibration stability. Calibration is easy with a simple correction factor procedure.
Factory calibrated in conformity with DIN EN ISO 7027 for long-term calibration stability. Calibration is easy with a simple correction factor procedure.
Multi-channel, multi-parameter system
Multiple Solitax sc sensors can be installed on one Hach SC Controller. The same controller can also accommodate any combination of parameters. All of Hach’s model sc sensors are “plug and play” with no complicated wiring or set-up procedure necessary.
Multiple Solitax sc sensors can be installed on one Hach SC Controller. The same controller can also accommodate any combination of parameters. All of Hach’s model sc sensors are “plug and play” with no complicated wiring or set-up procedure necessary.
This instrument connects to Claros, Hach’s innovative Water Intelligence System, enabling you to seamlessly connect and manage instruments, data, and process – anywhere, anytime. The result is greater confidence in your data and improved efficiency in your operations. To unlock the full potential of Claros, insist on Claros Enabled instruments.
可連接至 Hach 的創新水處理智慧系統 Claros，讓您隨時隨地無縫連接和管理儀器、數據和流程。這將顯著提升您對數據的信心，並提高您的營運效率。要充分發揮 Claros 的潛力，請務必選擇支援 Claros 的儀器。