氧氣感測器 Orbisphere Electrochemical Oxygen Sensor, Stainless Steel, 100 bar, EPDM O-Ring, fast temperature change option
產品編號:31130A.01
Orbisphere 311XX - the ultimate in O2 sensors 精準監測氧氣量的感測方案
The patented polarographic sensor design is a proven performer wherever knowledge of O2 content is critical. From beverage quality control to corrosion monitoring in power generators, from package sampling to chemical manufacturing, this sensor provides fast, accurate oxygen measurements, in gaseous or liquid samples.
極譜分析法感測器設計性能卓越,特別是針對需要精確測量氧氣量的領域。從飲料品質控制到工業發電機腐蝕監測,從包裝取樣到化學物質生產,Orbisphere 電化學方法溶氧感測器能夠快速、準確地測量氣態或液態樣品中的氧氣濃度。
A wide range of temperature and pressure ranges is made possible by the exclusive valve seat sealing, whereby the sensor cathode is mechanically tensioned against a ceramic valve seat to ensure the integrity of the seal. This design enables a vanishingly small residual signal, for improved accuracy.
獨特的閥座密封設計能夠適應寬廣的溫度和壓力範圍。此設計透過機械張力將感測器陰極壓緊在陶瓷閥座上,進而確保密封的完整性。此設計能夠產生極小的殘餘訊號,進而提高測量精確度。
All these oxygen sensors use the deep-draw membrane mounting method for a uniformly thin layer of electrolyte for faster response and superior stability. Coupled with a screw-on protection cap, the sensor provides in-service intervals of up to a year.
氧氣感測器採用深拉膜片安裝方式,形成均勻薄的電解液層,進而達到更快的反應速度和更優異的穩定度。配合旋入式保護帽,此感測器的使用期限可長達一年。
Certifications : 2004/108/EC - EN 61326-1
Parameter : Oxygen
Range : Range at 25 °C
2935A : 10 ppb-400 ppm or 20 Pa-1,000 kPa
2952A : 1 ppb-80 ppm or 5 Pa-200 kPa
2956A : 0.1 ppb-20 ppm or 0.25 Pa-50 kPa
29552A : 2 ppb-80 ppm or 5 Pa-200 kPa
Accuracy : ±1% of reading, or ± lower measurement range, whichever is greater
Flow Rate : Recommended flow rate in flow chamber
2935A: 20 mL/min
2952A: 30 mL/min
2956A: 180 mL/min
29552A: 50 mL/min
Response Time : 2935A: 2.5 min
2952A: 38 s
2956A: 7.2 s
29552A: 90 s
Temperature Range : Temperature compensated range from -5 - 50 °C (23 - 122 °F)
Fast Temperature Change Option : Yes, 100 bar
Protection Class : IP68 / NEMA4
*使用 Hach Orbisphere Controllers 進行控制 (sold separately)
關鍵字 : Orbisphere O2 sensor, O2 analyzer, O2 sensor, 氧氣監測儀, 氣態 氧氣濃度 分析儀, 液態 氧氣濃度 分析儀,
The patented polarographic sensor design is a proven performer wherever knowledge of O2 content is critical. From beverage quality control to corrosion monitoring in power generators, from package sampling to chemical manufacturing, this sensor provides fast, accurate oxygen measurements, in gaseous or liquid samples.
極譜分析法感測器設計性能卓越,特別是針對需要精確測量氧氣量的領域。從飲料品質控制到工業發電機腐蝕監測,從包裝取樣到化學物質生產,Orbisphere 電化學方法溶氧感測器能夠快速、準確地測量氣態或液態樣品中的氧氣濃度。
A wide range of temperature and pressure ranges is made possible by the exclusive valve seat sealing, whereby the sensor cathode is mechanically tensioned against a ceramic valve seat to ensure the integrity of the seal. This design enables a vanishingly small residual signal, for improved accuracy.
獨特的閥座密封設計能夠適應寬廣的溫度和壓力範圍。此設計透過機械張力將感測器陰極壓緊在陶瓷閥座上,進而確保密封的完整性。此設計能夠產生極小的殘餘訊號,進而提高測量精確度。
All these oxygen sensors use the deep-draw membrane mounting method for a uniformly thin layer of electrolyte for faster response and superior stability. Coupled with a screw-on protection cap, the sensor provides in-service intervals of up to a year.
氧氣感測器採用深拉膜片安裝方式,形成均勻薄的電解液層,進而達到更快的反應速度和更優異的穩定度。配合旋入式保護帽,此感測器的使用期限可長達一年。
Certifications : 2004/108/EC - EN 61326-1
Parameter : Oxygen
Range : Range at 25 °C
2935A : 10 ppb-400 ppm or 20 Pa-1,000 kPa
2952A : 1 ppb-80 ppm or 5 Pa-200 kPa
2956A : 0.1 ppb-20 ppm or 0.25 Pa-50 kPa
29552A : 2 ppb-80 ppm or 5 Pa-200 kPa
Accuracy : ±1% of reading, or ± lower measurement range, whichever is greater
Flow Rate : Recommended flow rate in flow chamber
2935A: 20 mL/min
2952A: 30 mL/min
2956A: 180 mL/min
29552A: 50 mL/min
Response Time : 2935A: 2.5 min
2952A: 38 s
2956A: 7.2 s
29552A: 90 s
Temperature Range : Temperature compensated range from -5 - 50 °C (23 - 122 °F)
Fast Temperature Change Option : Yes, 100 bar
Protection Class : IP68 / NEMA4
*使用 Hach Orbisphere Controllers 進行控制 (sold separately)
關鍵字 : Orbisphere O2 sensor, O2 analyzer, O2 sensor, 氧氣監測儀, 氣態 氧氣濃度 分析儀, 液態 氧氣濃度 分析儀,
Guard Ring Electrode Design 保護環極設計
An auxiliary guard ring electrode surrounds the working electrode to shield against the influence of other gases and improve stability. 輔助保護環電極環繞工作電極,可保護其他氣體的影響並提高穩定度
An auxiliary guard ring electrode surrounds the working electrode to shield against the influence of other gases and improve stability. 輔助保護環電極環繞工作電極,可保護其他氣體的影響並提高穩定度
Rugged Construction 堅固耐用
Use for harsh chemicals, hot CIP and high pressure situations.
Use for harsh chemicals, hot CIP and high pressure situations.
Flexibility 靈活彈性
Installs in-line for process control, or in flow chamber for spot measurement. Cable detaches at sensor end for installation and maintenance flexibility. 可線上安裝用於程序控制,也可安裝於流量室中進行點測。電纜在感測器端可拆卸,方便安裝和維護
Installs in-line for process control, or in flow chamber for spot measurement. Cable detaches at sensor end for installation and maintenance flexibility. 可線上安裝用於程序控制,也可安裝於流量室中進行點測。電纜在感測器端可拆卸,方便安裝和維護
From trace levels to super saturation
Unrivalled detection limit of ± 0.1 ppb or 100 ppt 偵測極限可達±0.1 ppb或100 ppt
Unrivalled detection limit of ± 0.1 ppb or 100 ppt 偵測極限可達±0.1 ppb或100 ppt



