Kipp & Zonen SUV5 Total UV Radiometer 紫外線幅照度計
產品編號
SUV5 is a Smart version of the CUV5 with digital signal processing. The accurate polynomial temperature correction and linearization make it ideal for monitoring high intensity UV lamps used in environmental test chambers.
SUV5 為 CUV5 的智慧型版本,具備數位訊號處理功能。精確的多項式溫度校正和線性化特性為監測環境試驗使用的高強度紫外線燈的理想選擇。

SUV5 has a RS-485 interface with Modbus® RTU communication protocol and an amplified analog signal output. It can operate from 5 to 30 VDC and takes little power. The calibrated sensitivity is stored in the SUV memory so that the digital data is directly in W/m2 and the analog output range is standardized. SUV’s can be interchanged and no changes have to be made in the data logger or data acquisition system after recalibration.
SUV5 有 RS-485 介面,支援 Modbus® RTU 通訊,並有放大後的類比訊號輸出。可在 5 至 30 VDC 電壓範圍內運作,功耗極低。校正後的靈敏度儲存在 SUV 記憶體中,因此數位資料直接以 W/m² 為單位,並且類比輸出範圍已標準化。 SUV 可互換使用,重新校正後無需對資料記錄器或資料擷取系統進行任何更改。

Use our free SmartExplorer Windows™ software for display of data , data logging, to a PC and for changing Modbus® address and communication settings.
使用我們免費的 SmartExplorer Windows™ 軟體,即可在 PC 上顯示數據、記錄數據,並變更 Modbus® 位址和通訊設定。

SUV5 is compatible with the same accessories as our SMP range of pyranometers.
SUV5 與我們的 SMP 系列輻射計相容於相同的配件。

Specific parts of the UV spectrum such as UVA, UVB or UVE / UV Index cannot be derived from the SUV5 measurements. For measurement of these individual parameters our specific SUV models are required.
SUV5 的測量結果無法導出紫外線光譜中的特定部分,例如 UVA、UVB 或 UVE/紫外線指數。要測量這些特定參數,請使用我們特定的 SUV 型號。

- For monitoring of Total UV irradiance
- Linearized for high intensity UV lamps
- Internal temperature correction
- No change of desiccant for 10 years
- RS-485 Modbus® RTU digital output
- 0 to 1 V analog output
- 5 year warranty

應用領域 : 環保, 氣象, 科學研究, 太陽能

關鍵字 : 紫外線幅照度計, 紫外線輻射計, 測量 紫外線 輻射 儀器, 測 UV 輻射
產品介紹