水中總有機碳線上分析儀 BioTector B7000i Online TOC Analyzer, 0 - 20000 mg/L C
產品編號：B7ABAA052AABAA2
The ideal on-line TOC Analyzer to achieve precise results even for your most challenging applications
Hach BioTector B7000i 線上 TOC 分析儀為市場上創新技術、免維護的總有機碳自動監測儀，即使在最具挑戰性的複雜水質環境也能獲得精確穩定的廢污水TOC監測數據。
Hach BioTector TOC analyzers provide maximum uptime and reliability due to a patented self-cleaning oxidation technology that easily handles difficult samples and significantly reduces maintenance. Unlike traditional TOC analyzers, the Biotector eliminates build up issues from salts, particulates, fats, oils and greases that lead to drift and high maintenance. With reliable, continuous monitoring and real-time process control, plant operators can optimize their processes to lower overall plant operating costs. The most advanced system in its class, Biotector products achieve precise results from the simplest to the most demanding applications.
B7000i 分析儀專利自清潔氧化技術輕鬆處理複雜困難水樣，並明顯減少與傳統線上測量的維護時間和成本。 B7000i 內建自清潔水樣管線和反應器。
即使您的廢污水中含有鹽、脂肪、油脂、污泥和顆粒物或 pH 值波動，B7000i 也能提供穩定可靠的分析數據。可靠連續監測和即時過程控制帶來的效率提升，讓廠區操作管理人員能夠專注於優化過程程序，進而降低整體營運成本。
BioTector TOC 分析儀能夠為從最簡單到最複雜的各種水質應用提供精準的分析結果。
超大尺寸的管路設計避免過濾和水樣污染。維護量極低。兩次維護之間無需校正或操作人員干預。節省化學藥劑用量、減少廢棄物和優化過程。
With patented two-stage advanced oxidation technology, the BioTector handles even the most challenging applications involving fats, oils, greases, salts, sludge, and particulates. Oversized tubing eliminates filtration and sample contamination. There's minimal maintenance. No calibration or operator intervention required between service intervals. Provides a quick pay back with cost savings in chemical dosing, waste reduction and optimized processes.
Many additional versions available on request.
Parameter 分析參數 : TOC, TIC, TC, VOC, after correlation COD, BOD
Measurement Method 分析方法 : Infrared measurement of CO2 after oxidation 氧化後二氧化碳的紅外線測量
Oxidation Method 氧化方法 : Patented Two-Stage Advanced Oxidation Process using Hyroxyl Radicals
Range 量測範圍 : 0 - 20000 mg/L C
Lower Limit of Detection (LOD) 低偵測限 : 0.06 mg/L C
Repeatability 重複性 : ± 3 % of reading or ± 0.3 mg/L C, whichever is greater, with Automatic Range Selection
Range Selection 範圍選擇 : Automatic or Manual Range Selection
Cycle Time 循環時間 : From 6.5 minutes, depending on application
Data Storage 數據儲存 : Previous 9999 analysis data on screen in the microcontroller memory and storage of data archive for the lifetime of the analyzer in the SD/MMC card.
Previous 99 fault data on screen in the microcontroller memory and storage of fault data archive for the lifetime of the analyzer in the SD/MMC card.
Communication 通訊傳輸 : Modbus RTU, Modbus TCP/IP & Profibus (when the Profibus option is selected, the digital output signals are sent through the Profibus converter with its specific communication protocol)
Except for Zone 1 certification then Modbus RTU, Modbus TCP/IP & Modbus TCP/IP Redundant is available
EExp / Hazardous Location : Certification options are available to European Standards, (ATEX Zone 1, Zone 2), North American Standards (Class I Division 2) and IECEx Zone 1
關鍵字 : online TOC analyzer, 水中 總有機碳 自動監測儀, TOC detector
Hach BioTector B7000i 線上 TOC 分析儀為市場上創新技術、免維護的總有機碳自動監測儀，即使在最具挑戰性的複雜水質環境也能獲得精確穩定的廢污水TOC監測數據。
Hach BioTector TOC analyzers provide maximum uptime and reliability due to a patented self-cleaning oxidation technology that easily handles difficult samples and significantly reduces maintenance. Unlike traditional TOC analyzers, the Biotector eliminates build up issues from salts, particulates, fats, oils and greases that lead to drift and high maintenance. With reliable, continuous monitoring and real-time process control, plant operators can optimize their processes to lower overall plant operating costs. The most advanced system in its class, Biotector products achieve precise results from the simplest to the most demanding applications.
B7000i 分析儀專利自清潔氧化技術輕鬆處理複雜困難水樣，並明顯減少與傳統線上測量的維護時間和成本。 B7000i 內建自清潔水樣管線和反應器。
即使您的廢污水中含有鹽、脂肪、油脂、污泥和顆粒物或 pH 值波動，B7000i 也能提供穩定可靠的分析數據。可靠連續監測和即時過程控制帶來的效率提升，讓廠區操作管理人員能夠專注於優化過程程序，進而降低整體營運成本。
BioTector TOC 分析儀能夠為從最簡單到最複雜的各種水質應用提供精準的分析結果。
超大尺寸的管路設計避免過濾和水樣污染。維護量極低。兩次維護之間無需校正或操作人員干預。節省化學藥劑用量、減少廢棄物和優化過程。
With patented two-stage advanced oxidation technology, the BioTector handles even the most challenging applications involving fats, oils, greases, salts, sludge, and particulates. Oversized tubing eliminates filtration and sample contamination. There's minimal maintenance. No calibration or operator intervention required between service intervals. Provides a quick pay back with cost savings in chemical dosing, waste reduction and optimized processes.
Many additional versions available on request.
Parameter 分析參數 : TOC, TIC, TC, VOC, after correlation COD, BOD
Measurement Method 分析方法 : Infrared measurement of CO2 after oxidation 氧化後二氧化碳的紅外線測量
Oxidation Method 氧化方法 : Patented Two-Stage Advanced Oxidation Process using Hyroxyl Radicals
Range 量測範圍 : 0 - 20000 mg/L C
Lower Limit of Detection (LOD) 低偵測限 : 0.06 mg/L C
Repeatability 重複性 : ± 3 % of reading or ± 0.3 mg/L C, whichever is greater, with Automatic Range Selection
Range Selection 範圍選擇 : Automatic or Manual Range Selection
Cycle Time 循環時間 : From 6.5 minutes, depending on application
Data Storage 數據儲存 : Previous 9999 analysis data on screen in the microcontroller memory and storage of data archive for the lifetime of the analyzer in the SD/MMC card.
Previous 99 fault data on screen in the microcontroller memory and storage of fault data archive for the lifetime of the analyzer in the SD/MMC card.
Communication 通訊傳輸 : Modbus RTU, Modbus TCP/IP & Profibus (when the Profibus option is selected, the digital output signals are sent through the Profibus converter with its specific communication protocol)
Except for Zone 1 certification then Modbus RTU, Modbus TCP/IP & Modbus TCP/IP Redundant is available
EExp / Hazardous Location : Certification options are available to European Standards, (ATEX Zone 1, Zone 2), North American Standards (Class I Division 2) and IECEx Zone 1
關鍵字 : online TOC analyzer, 水中 總有機碳 自動監測儀, TOC detector
Worry-free TOC with Smart Design
The B7000i comes with a built in self-cleaning sample line and reactor. This enables the B7000i to deliver trustworthy results even if your water contains high levels of fats, oils, greases, sludge and particulates or has pH swings.
The B7000i comes with a built in self-cleaning sample line and reactor. This enables the B7000i to deliver trustworthy results even if your water contains high levels of fats, oils, greases, sludge and particulates or has pH swings.
Easy Handling
All B7000i come with unique oversized tubing which eliminated the need for filtration and you can be sure to have a fully representative sample. The special tubing also prevents clogging as well as sample contamination.
All B7000i come with unique oversized tubing which eliminated the need for filtration and you can be sure to have a fully representative sample. The special tubing also prevents clogging as well as sample contamination.
Superior Reliability
Using BioTector’s internationally proven and patented Two Stage Advanced Oxidation technology the B7000i delivers maximum reliability, accuracy and availability with a MCert certified uptime of 99.86%. In addition no calibration or maintenance is required between 6-month service intervals.
Using BioTector’s internationally proven and patented Two Stage Advanced Oxidation technology the B7000i delivers maximum reliability, accuracy and availability with a MCert certified uptime of 99.86%. In addition no calibration or maintenance is required between 6-month service intervals.
Flexible field of application
Depending on the type of application, the instrument can operate across a very wide measuring range. The B7000i analyser also has multistreaming capabilities with up to 6 process streams possible. Additionally, it can be adapted for indoor or outdoor use.
Depending on the type of application, the instrument can operate across a very wide measuring range. The B7000i analyser also has multistreaming capabilities with up to 6 process streams possible. Additionally, it can be adapted for indoor or outdoor use.
Low Cost of Ownership
Installing a B7000i provides cost savings through optimizing processes by decreasing chemical dosing, waste reduction, reducing samples processes and lowering overall plant operation costs.
Installing a B7000i provides cost savings through optimizing processes by decreasing chemical dosing, waste reduction, reducing samples processes and lowering overall plant operation costs.