(高濃度)濁度監測儀 Surface Scatter 7 sc High Range Turbidimeter, with SC4500 Controller, 2 Channels
產品編號：LXV525.97KTO022
Providing the easy to integrate and upgrade SC4500 controller with the built to last Surface Scatter 7 sc sensor solution in one part number making ordering simple and fast. 經典款 Surface Scatter 7 sc 線上濁度感測器搭配新一代 SC4500 數位控制器
For detailed technical specifications, please visit the following part-numbers:
Surface Scatter 7 sc High Range Turbidimeter: LPV431.99.00002
SC4500: LXV525.99A11501
Outstanding results in high temperatures 高溫環境下的優異濁度監測技術 : Surface Scatter 7 sc
Able to measure very high and low turbidity levels accurately, this turbidimeter is uniquely designed so that the light source and the photocells never come in contact with the sample. 此濁度監測儀精確測量極高及極低濁度值；獨特的設計保持光源和光電元件始終不會與水樣接觸。
The sample is introduced into the center sample tube of an inclined turbidimeter body at a flow rate of 1 - 2 liters per minute. As the fluid spills over the top of the turbidimeter body, a stable, flat surface of liquid forms and becomes the measuring surface. 水樣以每分鐘 1 至 2 公升的流速引入傾斜式濁度儀主體的中心管內。當流體自主體頂部溢出時，會形成一個穩定且平坦的液面，該液面即作為量測面。
The light source emits a high-intensity beam of light, which strikes the surface of the fluid diagonally. The detector registers the light that is scattered at 90° to the incident beam. This scattered light is proportional to the content of suspended particles in the sample. 光源發出一束高強度光線，以傾斜角度照射在液面上。偵測器捕捉與入射光束成 90° 角散射的光線。散射光強度與樣品懸浮顆粒的濃度成正比。
Range 量測範圍 : 0.01 - 9999.9 NTU
Accuracy : ±5% of reading or ±0.1 NTU (whichever is greater) from 0 - 2000 NTU
Accuracy 2 : ±10% of reading from 2000 - 9999 NTU
Repeatability : 1.0% or ±0.04 NTU, whichever is greater
Resolution :
<1000 NTU: 0.01 NTU
1000 - 9999.9 NTU: 0.1 NTU
Response Time : Initial response in 45 seconds
Sample Flow Rate : Sample flow required 1.0 - 2.0 L/min
Sample Input : 0.75 " NPT female thread
Sample Output : 1 " NPT female thread
Sample Temperature : 0 - 50 °C
Alarm 警示 : Relays can be programmed through sc controller for warning, alarm, feeder, event, pulse width modulation, and frequency control.
Installation Category : Category II
Controller Compatibility 相容控制器 : SC4500, SC1000, SC200
Applications 應用 : Groundwater, Industrial Wastewater, Influent for Wastewater, Municipal Water, Pre-Treatment, Source Water, Storm Water, Surface Water, Water Reuse
關鍵字 : online turbidimeter, online turbidity analyzer, 線上 濁度 分析儀, 高濃度污水濁度分析儀, 工業廢水線上濁度分析儀, 高懸浮固體濁度監測, 高濁度製程水線上監測, 0–10000 NTU 濁度分析儀, 紙廠製程水濁度監測, 水處理線上濁度監測系統, SS7 sc SC4500 濁度分析儀, Hach 高濃度濁度分析儀, Hach Surface Scatter 濁度計
For detailed technical specifications, please visit the following part-numbers:
Surface Scatter 7 sc High Range Turbidimeter: LPV431.99.00002
SC4500: LXV525.99A11501
Outstanding results in high temperatures 高溫環境下的優異濁度監測技術 : Surface Scatter 7 sc
Able to measure very high and low turbidity levels accurately, this turbidimeter is uniquely designed so that the light source and the photocells never come in contact with the sample. 此濁度監測儀精確測量極高及極低濁度值；獨特的設計保持光源和光電元件始終不會與水樣接觸。
The sample is introduced into the center sample tube of an inclined turbidimeter body at a flow rate of 1 - 2 liters per minute. As the fluid spills over the top of the turbidimeter body, a stable, flat surface of liquid forms and becomes the measuring surface. 水樣以每分鐘 1 至 2 公升的流速引入傾斜式濁度儀主體的中心管內。當流體自主體頂部溢出時，會形成一個穩定且平坦的液面，該液面即作為量測面。
The light source emits a high-intensity beam of light, which strikes the surface of the fluid diagonally. The detector registers the light that is scattered at 90° to the incident beam. This scattered light is proportional to the content of suspended particles in the sample. 光源發出一束高強度光線，以傾斜角度照射在液面上。偵測器捕捉與入射光束成 90° 角散射的光線。散射光強度與樣品懸浮顆粒的濃度成正比。
Range 量測範圍 : 0.01 - 9999.9 NTU
Accuracy : ±5% of reading or ±0.1 NTU (whichever is greater) from 0 - 2000 NTU
Accuracy 2 : ±10% of reading from 2000 - 9999 NTU
Repeatability : 1.0% or ±0.04 NTU, whichever is greater
Resolution :
<1000 NTU: 0.01 NTU
1000 - 9999.9 NTU: 0.1 NTU
Response Time : Initial response in 45 seconds
Sample Flow Rate : Sample flow required 1.0 - 2.0 L/min
Sample Input : 0.75 " NPT female thread
Sample Output : 1 " NPT female thread
Sample Temperature : 0 - 50 °C
Alarm 警示 : Relays can be programmed through sc controller for warning, alarm, feeder, event, pulse width modulation, and frequency control.
Installation Category : Category II
Controller Compatibility 相容控制器 : SC4500, SC1000, SC200
Applications 應用 : Groundwater, Industrial Wastewater, Influent for Wastewater, Municipal Water, Pre-Treatment, Source Water, Storm Water, Surface Water, Water Reuse
關鍵字 : online turbidimeter, online turbidity analyzer, 線上 濁度 分析儀, 高濃度污水濁度分析儀, 工業廢水線上濁度分析儀, 高懸浮固體濁度監測, 高濁度製程水線上監測, 0–10000 NTU 濁度分析儀, 紙廠製程水濁度監測, 水處理線上濁度監測系統, SS7 sc SC4500 濁度分析儀, Hach 高濃度濁度分析儀, Hach Surface Scatter 濁度計
Less fouling for easy maintenance 污垢較少，容易維護
The Hach Surface Scatter 7 sc Turbidimeter (SS7) is uniquely designed so that the light source and photocell never come in contact with the sample. In fluids with high loads of suspended solids this makes sample cell cleaning and replacement unnecessary. 獨特技術設計，讓光源和光電元件始終不與樣品接觸。在處理含有大量懸浮固體的流體時，此設計無需清潔或更換樣品池。
The Hach Surface Scatter 7 sc Turbidimeter (SS7) is uniquely designed so that the light source and photocell never come in contact with the sample. In fluids with high loads of suspended solids this makes sample cell cleaning and replacement unnecessary. 獨特技術設計，讓光源和光電元件始終不與樣品接觸。在處理含有大量懸浮固體的流體時，此設計無需清潔或更換樣品池。
Wide Measurement Range 寬廣的量測範圍
The SS7 turbidimeter can reliably measure turbidity from 0 to 9999 NTU in samples that vary from clear water to corrosive and high temperature paper mill and oil field samples. 可靠量測 0 至 9999 NTU 範圍內的濁度，適用於從清水到造紙廠及油田環境中具有腐蝕性、高溫特性的各類水樣。
The SS7 turbidimeter can reliably measure turbidity from 0 to 9999 NTU in samples that vary from clear water to corrosive and high temperature paper mill and oil field samples. 可靠量測 0 至 9999 NTU 範圍內的濁度，適用於從清水到造紙廠及油田環境中具有腐蝕性、高溫特性的各類水樣。
Easy Adoption 簡單搭配運作
The familiar experience of a modern touchscreen, the ability to use your current Hach sensors, and the same footprint as the SC200, make installation and integration of the SC4500 Controller seamless. SC4500 系列數位控制器採用現代化的觸控式螢幕介面，相容於您現有的 Hach 感測器，且安裝尺寸與 SC200 系列一致，確保安裝與系統整合的順暢無縫接軌。
The familiar experience of a modern touchscreen, the ability to use your current Hach sensors, and the same footprint as the SC200, make installation and integration of the SC4500 Controller seamless. SC4500 系列數位控制器採用現代化的觸控式螢幕介面，相容於您現有的 Hach 感測器，且安裝尺寸與 SC200 系列一致，確保安裝與系統整合的順暢無縫接軌。
No Time for Downtime 避免設備停機風險
The SC4500's built-in predictive diagnostic software ensures measurement confidence and reduces the risk of unexpected equipment downtime by enabling proactive maintenance planning via MSM, including step-by-step instructions. SC4500 內建預測維護診斷軟體，提升測量資料的可靠度；透過 MSM（行動服務管理）功能，系統能夠支援主動式維護規劃，並提供詳細的逐步操作指南，進而降低設備意外停機的風險。
The SC4500's built-in predictive diagnostic software ensures measurement confidence and reduces the risk of unexpected equipment downtime by enabling proactive maintenance planning via MSM, including step-by-step instructions. SC4500 內建預測維護診斷軟體，提升測量資料的可靠度；透過 MSM（行動服務管理）功能，系統能夠支援主動式維護規劃，並提供詳細的逐步操作指南，進而降低設備意外停機的風險。