水中氯離子分析儀 EZ3005sc Chloride Ion-Selective Electrode (ISE) Analyzer, 1 stream, 4x mA
產品編號：EZ3005.9700140T
The Challenge of Consistent Chloride Monitoring
民生和工業用水中的氯化物監測容易受到結垢、漂移和溫度波動的影響，進而增加維護成本和合規風險。 EZ3005sc 採用間歇式離子選擇性電極 (ISE) 測量和溫控技術，大幅減少人工干預，穩定、精確監測水中氯化物。自動化操作協助減少日常維護工作量並降低營運成本，同時確保可靠的氯化物數據可用於製程控制。
Chloride monitoring in municipal and industrial water can be disrupted by fouling, drift and temperature swings -creating extra maintenance and compliance risk. The EZ3005sc uses discontinuous ISE measurement with temperature control to deliver stable, precise chloride results with minimal operator intervention. Automated operation helps reduce routine maintenance and lower operating cost while keeping reliable chloride data available for process control.
分析儀設計為容易整合，支援多種類比和數位輸出，包括 Modbus、Profinet 和 Ethernet/IP，因此您可以將監測數據和儀器診斷資訊直接匯入控制系統。
Designed for straightforward integration, the analyzer supports multiple analog and digital outputs - including Modbus, Profinet and Ethernet/IP - so you can bring results and diagnostics directly into your control system.
Benefits:
- Discontinuous ISE measurement with temperature control for repeatable results 採用溫控進行間歇式ISE測量，以獲得可重複的數據結果
- Automated operation reduces maintenance effort and operator time 自動化操作設計減少維修工作量和操作人員時間
- Efficient reagent use helps lower total cost of ownership 高效率的試劑使用設計協助降低整體擁有成本
- Analog and digital connectivity: Modbus, Profinet and Ethernet/IP 類比和數位連接
- Real-time results and diagnostics to support compliance and process optimization 即時監測數據和儀器診斷以支援合規和流程優化
Certifications 認證 : CE, ETL certified to UL and CSA safety standards, UKCA
Measurement method 量測方法 : Discontinuous, direct measurement by combined Ion-Selective Electrode
Range 量測範圍 :
2 - 100 mg/L Cl-
5 - 250 mg/L Cl-
10 - 500 mg/L Cl-
20 - 1000 mg/L Cl-
Lower Limit of Detection (LOD) :
2 - 100 mg/L Cl-: 2 mg/L
5 - 250 mg/L Cl-: 5 mg/L
10 - 500 mg/L Cl-: 10 mg/L
20 - 1000 mg/L Cl-: : 20 mg/L
Precision : Better than 2% full scale range for standard test solutions
Sample Flow Rate : 100 - 300 mL/min
Sample Pressure : By external overflow vessel (open to atmospheric pressure)
Sample Quality : Maximum particle size 100 µm, < 0.1 g/L; Turbidity < 50 NTU
Cycle Time : Default: 5 minutes
Continuous: 5 minutes
Automatic cleaning 自動清潔 : Yes; Frequency freely programmable: 6 hours, 12 hours, daily, weekly
Instrument Air : Dry and oil free according to ISA-S7.0.01-1996 quality standard for instrument air. Used to flush the instrument in corrosive environment. Min. 0.2 bar - Max. 0.5 bar
Calibration 校正 : Automatic; 2-point; Frequency freely programmable: 6 hours, 12 hours, daily, weekly. Note: manufacturer recommends that a calibration is done when the reagents are replaced
Interferences 干擾 : Bromide [(Br)-], sulfide [(S)²-], iodide [(I)-], cyanide [(CN)-] ions may interfere. Mercury [(Hg)+] must be absent. Ammonia [NH₃] and thiosulphate [(S₂O₃)²-] may interfere. Fats, oil, proteins, surfactants and tar.
Number of sample streams 水樣流 : Standard: 1
Optional accessory for 2, 4, or 8 sample streams
Analog Outputs 類比輸出 : Active 0 - 20 mA (or 4 - 20 mA) max. 500 Ohm load, standard 4, optional: 8
Digital Outputs 數位輸出 : Relays: 5 contacts, not user configurable: Malfunction, maintenance, analysis ready, sample ready, sample ready (EZ9150)
Ethernet Connections: Optional: Claros Ethernet connection and Modbus TCP/IP Ethernet connector; LAN version; 10/100 Mbps or Profinet or Ethernet IP
RS485 communication: Profibus DP or Modbus RTU
Protection Class : IP44
關鍵字 : 水中氯離子濃度監測儀, Chloride Analyzer,
民生和工業用水中的氯化物監測容易受到結垢、漂移和溫度波動的影響，進而增加維護成本和合規風險。 EZ3005sc 採用間歇式離子選擇性電極 (ISE) 測量和溫控技術，大幅減少人工干預，穩定、精確監測水中氯化物。自動化操作協助減少日常維護工作量並降低營運成本，同時確保可靠的氯化物數據可用於製程控制。
Chloride monitoring in municipal and industrial water can be disrupted by fouling, drift and temperature swings -creating extra maintenance and compliance risk. The EZ3005sc uses discontinuous ISE measurement with temperature control to deliver stable, precise chloride results with minimal operator intervention. Automated operation helps reduce routine maintenance and lower operating cost while keeping reliable chloride data available for process control.
分析儀設計為容易整合，支援多種類比和數位輸出，包括 Modbus、Profinet 和 Ethernet/IP，因此您可以將監測數據和儀器診斷資訊直接匯入控制系統。
Designed for straightforward integration, the analyzer supports multiple analog and digital outputs - including Modbus, Profinet and Ethernet/IP - so you can bring results and diagnostics directly into your control system.
Benefits:
- Discontinuous ISE measurement with temperature control for repeatable results 採用溫控進行間歇式ISE測量，以獲得可重複的數據結果
- Automated operation reduces maintenance effort and operator time 自動化操作設計減少維修工作量和操作人員時間
- Efficient reagent use helps lower total cost of ownership 高效率的試劑使用設計協助降低整體擁有成本
- Analog and digital connectivity: Modbus, Profinet and Ethernet/IP 類比和數位連接
- Real-time results and diagnostics to support compliance and process optimization 即時監測數據和儀器診斷以支援合規和流程優化
Certifications 認證 : CE, ETL certified to UL and CSA safety standards, UKCA
Measurement method 量測方法 : Discontinuous, direct measurement by combined Ion-Selective Electrode
Range 量測範圍 :
2 - 100 mg/L Cl-
5 - 250 mg/L Cl-
10 - 500 mg/L Cl-
20 - 1000 mg/L Cl-
Lower Limit of Detection (LOD) :
2 - 100 mg/L Cl-: 2 mg/L
5 - 250 mg/L Cl-: 5 mg/L
10 - 500 mg/L Cl-: 10 mg/L
20 - 1000 mg/L Cl-: : 20 mg/L
Precision : Better than 2% full scale range for standard test solutions
Sample Flow Rate : 100 - 300 mL/min
Sample Pressure : By external overflow vessel (open to atmospheric pressure)
Sample Quality : Maximum particle size 100 µm, < 0.1 g/L; Turbidity < 50 NTU
Cycle Time : Default: 5 minutes
Continuous: 5 minutes
Automatic cleaning 自動清潔 : Yes; Frequency freely programmable: 6 hours, 12 hours, daily, weekly
Instrument Air : Dry and oil free according to ISA-S7.0.01-1996 quality standard for instrument air. Used to flush the instrument in corrosive environment. Min. 0.2 bar - Max. 0.5 bar
Calibration 校正 : Automatic; 2-point; Frequency freely programmable: 6 hours, 12 hours, daily, weekly. Note: manufacturer recommends that a calibration is done when the reagents are replaced
Interferences 干擾 : Bromide [(Br)-], sulfide [(S)²-], iodide [(I)-], cyanide [(CN)-] ions may interfere. Mercury [(Hg)+] must be absent. Ammonia [NH₃] and thiosulphate [(S₂O₃)²-] may interfere. Fats, oil, proteins, surfactants and tar.
Number of sample streams 水樣流 : Standard: 1
Optional accessory for 2, 4, or 8 sample streams
Analog Outputs 類比輸出 : Active 0 - 20 mA (or 4 - 20 mA) max. 500 Ohm load, standard 4, optional: 8
Digital Outputs 數位輸出 : Relays: 5 contacts, not user configurable: Malfunction, maintenance, analysis ready, sample ready, sample ready (EZ9150)
Ethernet Connections: Optional: Claros Ethernet connection and Modbus TCP/IP Ethernet connector; LAN version; 10/100 Mbps or Profinet or Ethernet IP
RS485 communication: Profibus DP or Modbus RTU
Protection Class : IP44
關鍵字 : 水中氯離子濃度監測儀, Chloride Analyzer,
Reliable, Stable Measurements 穩定可靠監測
Avoid downtime from unreliable ISE data caused by temperature fluctuations. The EZ3005sc stabilizes both sample and electrode using a temperature controlled flow cell, eliminating measurement errors and delivering precise, repeatable chloride results operators can trust. 避免溫度波動導致的 ISE 數據不可靠而造成的停機。 EZ3005sc 採用溫控流通池穩定水樣和電極，消除測量誤差，提供操作人員可信賴的精確、可重複的氯離子監測數據。
Avoid downtime from unreliable ISE data caused by temperature fluctuations. The EZ3005sc stabilizes both sample and electrode using a temperature controlled flow cell, eliminating measurement errors and delivering precise, repeatable chloride results operators can trust. 避免溫度波動導致的 ISE 數據不可靠而造成的停機。 EZ3005sc 採用溫控流通池穩定水樣和電極，消除測量誤差，提供操作人員可信賴的精確、可重複的氯離子監測數據。
Lower Maintenance Effort 低維護工作量
Minimize downtime and service costs with the EZ3005sc. Automated 2 point calibration, reagent alerts, a rugged ISE electrode, and minimal moving parts extend maintenance intervals; so operators spend less time servicing instruments and more time on plant operations. EZ3005sc 大幅減少停機時間和維護成本。自動兩點校正、試劑警示、堅固耐用的 ISE 電極以及極少的活動零件延長維護週期；因此，操作人員可減少儀器維護時間，將更多時間投入到廠務運作
Minimize downtime and service costs with the EZ3005sc. Automated 2 point calibration, reagent alerts, a rugged ISE electrode, and minimal moving parts extend maintenance intervals; so operators spend less time servicing instruments and more time on plant operations. EZ3005sc 大幅減少停機時間和維護成本。自動兩點校正、試劑警示、堅固耐用的 ISE 電極以及極少的活動零件延長維護週期；因此，操作人員可減少儀器維護時間，將更多時間投入到廠務運作
Reduced Operating Cost 降低營運成本
The EZ3005sc helps optimize operating costs by reducing chemical consumption and service visits. Multi stream capability monitors up to eight sample lines, lowering cost per sampling point and extending equipment life. EZ3005sc 透過減少化學品消耗及維護次數，協助優化營運成本。多水樣流的功能最多可監測8個水樣流，降低每個採樣點的成本並延長設備壽命。
The EZ3005sc helps optimize operating costs by reducing chemical consumption and service visits. Multi stream capability monitors up to eight sample lines, lowering cost per sampling point and extending equipment life. EZ3005sc 透過減少化學品消耗及維護次數，協助優化營運成本。多水樣流的功能最多可監測8個水樣流，降低每個採樣點的成本並延長設備壽命。
Designed for easy integration into existing control systems 容易整合到您現有的控制系統
With a wide range of analogue and digital outputs, this analyzer aligns with plant specific requirements, ensuring compatibility with existing infrastructure and immediate access to real time measurement data. 類比和數位輸出，此分析儀容易與您現有的系統設施整合，並可立即存取即時監測數據
With a wide range of analogue and digital outputs, this analyzer aligns with plant specific requirements, ensuring compatibility with existing infrastructure and immediate access to real time measurement data. 類比和數位輸出，此分析儀容易與您現有的系統設施整合，並可立即存取即時監測數據