水中銨、硝酸鹽感測器 AN-ISE sc ISE combination Ammonium and Nitrate probe (immersion), 10 m cable
產品編號：LXV440.99.00012
AN-ISE sc: Combination sensor for ammonium and nitrate 水中銨和硝酸鹽感測器
The special feature of the probe is the Cartrical technology. This provides reliable measured values and considerably reduced maintenance time and costs in comparison with conventional ISE probes.
此探頭的特殊之處在於其採用Cartrical技術。相較於傳統的ISE 離子選擇探頭，此技術提供可靠的監測，並明顯降低人力維護時間和成本。
Parameter 分析參數 : Ammonia, Nitrate 氨、硝酸鹽
Measurement Method 量測方法 : Potentiometric ion-selective electrodes for ammonium, potassium, nitrate and chloride, reference system and temperature sensor 用於測定水中銨、鉀、硝酸鹽和氯離子的電位離子選擇電極、參考系統和溫度感測器
Measuring Interval : Continuous 連續監測
Range 量測範圍 :
0 - 1000 mg/L NH4-N,
0 - 1000 mg/L NO3-N,
0 - 1000 mg/L K+,
0 - 1000 mg/L Cl-
Accuracy : 5% of measured value +0.2 mg/L (with standard solutions) NH4-N and NO3-N
Lower Limit of Detection (LOD) : 0.2 mg/L NH4–N and NO3-N
Repeatability 重複性 : ± 5 % of the measured value (with standard solution)+ 0.2 mg/L NH4-N and NO3-N
Response Time : < 3 min
Calibration Method 校正 : Factory calibrated sensor cartridge (CARTRICAL), 1 and 2 point matrix correction
內建之ISE電極可同時補償最強的干擾物質鉀離子和氯離子干擾
The special feature of the probe is the Cartrical technology. This provides reliable measured values and considerably reduced maintenance time and costs in comparison with conventional ISE probes.
Comes as a complete system from a single supplier. The probe is installed on the side of the tank. An SC controller completes the system. It can be extended to include an automatic cleaning unit with a compressor.
Hach 專利儀器預知維護軟體 Prognosys is a predictive diagnostic system that allows you to be proactive in your maintenance, by alerting you to upcoming instrument issues. Know with confidence whether changes in your measurements are due to changes in your instrument or your water.
Hach Prognosys 為儀器預測診斷系統，能夠提前預警儀器可能出現的問題，進而協助您主動採取維護。您可以準確判斷測量數據的變化是由儀器本身還是水質變化引起的。
This instrument connects to Claros, Hach’s innovative Water Intelligence System, enabling you to seamlessly connect and manage instruments, data, and process – anywhere, anytime. The result is greater confidence in your data and improved efficiency in your operations. To unlock the full potential of Claros, insist on Claros Enabled instruments.
此監測儀也可連接至Hach 的創新水處理智慧系統 Claros，讓您隨時隨地無縫連接和管理儀器、數據和流程。提升您對數據的信心，並提高營運效率。要充分發揮 Claros 的潛力，請務必選擇支援 Claros 的儀器。
*使用Hach SC系列 digital controllers 數位水質控制器進行監控
關鍵字 : 水中 氨氮 濃度 監測儀, 廢污水 氨氮 連續監測, 污水 氨氮 分析儀, 硝酸鹽氮 監測, 銨離子濃度 監測, 銨離子感測器, 氨氮濃度 自動監測, 線上監測 硝酸鹽, 硝酸鹽氮 分析儀, NH4–N analyzer, NO3-N analyzer
The special feature of the probe is the Cartrical technology. This provides reliable measured values and considerably reduced maintenance time and costs in comparison with conventional ISE probes.
此探頭的特殊之處在於其採用Cartrical技術。相較於傳統的ISE 離子選擇探頭，此技術提供可靠的監測，並明顯降低人力維護時間和成本。
Parameter 分析參數 : Ammonia, Nitrate 氨、硝酸鹽
Measurement Method 量測方法 : Potentiometric ion-selective electrodes for ammonium, potassium, nitrate and chloride, reference system and temperature sensor 用於測定水中銨、鉀、硝酸鹽和氯離子的電位離子選擇電極、參考系統和溫度感測器
Measuring Interval : Continuous 連續監測
Range 量測範圍 :
0 - 1000 mg/L NH4-N,
0 - 1000 mg/L NO3-N,
0 - 1000 mg/L K+,
0 - 1000 mg/L Cl-
Accuracy : 5% of measured value +0.2 mg/L (with standard solutions) NH4-N and NO3-N
Lower Limit of Detection (LOD) : 0.2 mg/L NH4–N and NO3-N
Repeatability 重複性 : ± 5 % of the measured value (with standard solution)+ 0.2 mg/L NH4-N and NO3-N
Response Time : < 3 min
Calibration Method 校正 : Factory calibrated sensor cartridge (CARTRICAL), 1 and 2 point matrix correction
內建之ISE電極可同時補償最強的干擾物質鉀離子和氯離子干擾
The special feature of the probe is the Cartrical technology. This provides reliable measured values and considerably reduced maintenance time and costs in comparison with conventional ISE probes.
Comes as a complete system from a single supplier. The probe is installed on the side of the tank. An SC controller completes the system. It can be extended to include an automatic cleaning unit with a compressor.
Hach 專利儀器預知維護軟體 Prognosys is a predictive diagnostic system that allows you to be proactive in your maintenance, by alerting you to upcoming instrument issues. Know with confidence whether changes in your measurements are due to changes in your instrument or your water.
Hach Prognosys 為儀器預測診斷系統，能夠提前預警儀器可能出現的問題，進而協助您主動採取維護。您可以準確判斷測量數據的變化是由儀器本身還是水質變化引起的。
This instrument connects to Claros, Hach’s innovative Water Intelligence System, enabling you to seamlessly connect and manage instruments, data, and process – anywhere, anytime. The result is greater confidence in your data and improved efficiency in your operations. To unlock the full potential of Claros, insist on Claros Enabled instruments.
此監測儀也可連接至Hach 的創新水處理智慧系統 Claros，讓您隨時隨地無縫連接和管理儀器、數據和流程。提升您對數據的信心，並提高營運效率。要充分發揮 Claros 的潛力，請務必選擇支援 Claros 的儀器。
*使用Hach SC系列 digital controllers 數位水質控制器進行監控
關鍵字 : 水中 氨氮 濃度 監測儀, 廢污水 氨氮 連續監測, 污水 氨氮 分析儀, 硝酸鹽氮 監測, 銨離子濃度 監測, 銨離子感測器, 氨氮濃度 自動監測, 線上監測 硝酸鹽, 硝酸鹽氮 分析儀, NH4–N analyzer, NO3-N analyzer
Trustable results for ammonium and nitrate
Looking for new ways to stretch money and reduce consumable cost? We have the perfect solution for you! Our new combination sensor with ion-selective electrode (ISE) technology was developed to measure both NH4 and NO3 at the same spot. What is unique? The most significant interferences of K and Cl are simultaneously compensated by integrated ISE electrodes, ensuring accurate results 24h/7days.
Easy handling with Cartrical cartridge plus
The compact Cartrical cartridge contains four electrodes which are calibrated to each other before leaving the factory. Through the newly developed Cartrical plus technology, the factory calibration is automatically identified after replacing the cartridge. The compact design does away with tiresome handling and adjustment of individual electrodes: just unscrew the old cartridge, plug in the new one and the sensor is immediately ready to measure.
The compact Cartrical cartridge contains four electrodes which are calibrated to each other before leaving the factory. Through the newly developed Cartrical plus technology, the factory calibration is automatically identified after replacing the cartridge. The compact design does away with tiresome handling and adjustment of individual electrodes: just unscrew the old cartridge, plug in the new one and the sensor is immediately ready to measure.
With a menu-guided operation and step-by-step guide with clear text, the combination AN-ISE sc sensor is very easy to use. It works directly with every SC controller without complicated wiring or set up procedures: just plug and play. The common SC controller platform allows intuitive usage not only for ammonium and nitrate but also for other parameters like pH, DO, etc.
Always under control
In combination with SC1000 controller alert messages from AN-ISE sc sensor can be transmitted to the control room or by SMS / e-mail to a mobile phone. By this you are always informed about the status of your processes, early enough to react quickly.
In combination with SC1000 controller alert messages from AN-ISE sc sensor can be transmitted to the control room or by SMS / e-mail to a mobile phone. By this you are always informed about the status of your processes, early enough to react quickly.
You can trust our ISE experience gathered in many waste water applications around the world. Based on this we have developed the next ISE generation to fulfill your requirements even better. Our application team is always close by.